From: Venkey (venkateshjaya@gmail.com)
Date: Mon Oct 08 2007 - 04:10:50 ART
Hi
Im still facing problem here...one more point of note is that , the sever
and clients are connected through a MPLS IPVPN network.
Does this makes any specific requirement on the configuration- because at my
CE router, im simply using static routing and MPLS VPN is transparent to the
CE router.
Appreciate any thoughts
Tks.
On 10/4/07, Gary Duncanson <gary.duncanson@googlemail.com> wrote:
>
> Useful information.
>
> Thanks Ajay.
>
> Gary
> ----- Original Message -----
> From: "Ajay Prakash" <ajay.prakash@networkpeople.co.in>
> To: "'Venkey'" <venkateshjaya@gmail.com>; <ccielab@groupstudy.com>
> Sent: Wednesday, October 03, 2007 5:36 PM
> Subject: RE: windows AD across wan link
>
>
> > Hello,
> >
> > If the remote Xp clients have IP reachibility to the AD and presuming
> that
> > none of the required ports are blocked, I'd suspect problems with MTU.
> > Another reason can be un-ordered delivery of Kerberos packets as it uses
> > UDP. If you are sure that there is no routing issue, then I would
> suggest
> > following the below mentioned two steps.
> >
> > 1. MS article 314825 http://support.microsoft.com/kb/314825
> > Ping the DC from the XP client with packet size of 1472 and set the DF
> > bit.
> > (ping <DC> -l 1472 -f)
> > If you get a fragmentation error, then either hardcode the MTU on
> > clients
> > Or Enable PMTU Detection on clients.
> >
> > 2. MS article 244474 http://support.microsoft.com/kb/244474
> > Force Kerberos to use TCP in place of UDP
> >
> > Provided everything else is in order, I am sure your clients would be
> able
> > to join domain after you follow these steps.
> >
> > Ajay
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > Venkey
> > Sent: Wednesday, October 03, 2007 11:09 AM
> > To: ccielab@groupstudy.com
> > Subject: windows AD across wan link
> >
> > Hello
> >
> >
> > Have a situation where the hub site is using cisco 3825 router hosting
> the
> > windows DC. And 5 remote site with windows XP pc on their lan connected
> to
> > the hub site using a 1841 router.
> > Question is: is there any specific configuration to be done at the hub
> > site
> > and remote routers for the remote site PCs to join the AD.
> >
> > PS:remote PC are able to reach the hub sever via ping.
> >
> > Thanks.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:12 ART