From: slevin kremera (slevin.kremera@gmail.com)
Date: Sat Oct 06 2007 - 19:54:50 ART
thanks a ton guys
On 10/6/07, darth router <darklordrouter@gmail.com> wrote:
>
> Command Ref is Mo betta.
>
> :)
>
> On 10/5/07, slevin kremera <slevin.kremera@gmail.com> wrote:
>
> > Scott..
> >
> > thats what i said..the only difference is u went to command reference
> > and i
> > went to configuration
> >
> > sooooooo
> >
> >
> > On 10/6/07, Scott Morris <swm@emanon.com > wrote:
> > >
> > > Except that under "Usage Guidelines" for the same command, it very
> > > specifically states:
> > >
> > > "Specifying a level causes messages at that level and numerically
> > lower
> > > levels to be sent to the console (TTY lines). See Table 9 for a list
> > of
> > > the
> > > level arguments."
> > >
> > > Soooooo.... Sometimes it takes a bit of reading along the way and not
> > > just
> > > the top part!
> > >
> > >
> > >
> > http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hnm_r/
> > > nmg_02h.htm#wp1067755
> > >
> > > Just think about the idea that not everything can be memorized and in
> > the
> > > lab, the DocCD is your only friend. So it's good to get to know it
> > very
> > > well before hand!
> > >
> > > HTH,
> > >
> > >
> > > Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
> > > JNCIE-M
> > > #153, CISSP, et al.
> > > CCSI/JNCI-M/JNCI-ER
> > > VP - Technical Training - IPexpert, Inc.
> > > IPexpert Sr. Technical Instructor
> > >
> > > A Cisco Learning Partner - We Accept Learning Credits!
> > >
> > > smorris@ipexpert.com
> > >
> > > Telephone: +1.810.326.1444
> > > Fax: +1.810.454.0130
> > > http://www.ipexpert.com
> > >
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > Of
> > > slevin kremera
> > > Sent: Friday, October 05, 2007 10:42 PM
> > > To: devecchio turner
> > > Cc: Cisco certification
> > > Subject: Re: logging buffered
> > >
> > > i am very good at navigating the doc cd..thanks for the advice
> > >
> > > by the way it says this
> > >
> > > The *logging console* command limits the logging messages displayed on
> > the
> > > console terminal to messages with a level number at or below the
> > specified
> > > severity level, which is specified by the *level* argument.
> > >
> > > On 10/6/07, devecchio turner < dt30083@gmail.com> wrote:
> > > >
> > > > The documentaion cd says what?
> > > >
> > > > Www.cisco.com/univercd.. merymo will server you much better if you
> > > > look it up.. And it will get you used to navigating the doc cd..
> > > >
> > > > On 10/5/07 9:13 PM, "slevin kremera" <slevin.kremera@gmail.com >
> > wrote:
> > > >
> > > > > logging buffered buffersize level
> > > > >
> > > > > when u put the level as 7 ,will it log everything from 0-7?
> > > > >
> > > > >
> > ____________________________________________________________________
> > > > > ___ Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:12 ART