From: Scott Morris (smorris@ipexpert.com)
Date: Sat Oct 06 2007 - 13:30:25 ART
That depends on how much you know about what you are looking for! IMHO,
the command reference is great if you know the general area and/or have key
words to search for to find something.
The config guide is good for conceptual information if you need to research
a little more about HOW something works, or want some more complete config
examples.
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE-M
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
VP - Technical Training - IPexpert, Inc.
IPexpert Sr. Technical Instructor
A Cisco Learning Partner - We Accept Learning Credits!
smorris@ipexpert.com
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
darth router
Sent: Saturday, October 06, 2007 7:55 AM
To: slevin kremera
Cc: swm@emanon.com; devecchio turner; Cisco certification
Subject: Re: logging buffered
Command Ref is Mo betta.
:)
On 10/5/07, slevin kremera <slevin.kremera@gmail.com> wrote:
>
> Scott..
>
> thats what i said..the only difference is u went to command reference
> and i went to configuration
>
> sooooooo
>
>
> On 10/6/07, Scott Morris <swm@emanon.com> wrote:
> >
> > Except that under "Usage Guidelines" for the same command, it very
> > specifically states:
> >
> > "Specifying a level causes messages at that level and numerically
> > lower levels to be sent to the console (TTY lines). See Table 9 for
> > a list of the level arguments."
> >
> > Soooooo.... Sometimes it takes a bit of reading along the way and
> > not just the top part!
> >
> >
> >
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/
> hnm_r/
> > nmg_02h.htm#wp1067755
> >
> > Just think about the idea that not everything can be memorized and
> > in
> the
> > lab, the DocCD is your only friend. So it's good to get to know it
> > very well before hand!
> >
> > HTH,
> >
> >
> > Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
> > JNCIE-M #153, CISSP, et al.
> > CCSI/JNCI-M/JNCI-ER
> > VP - Technical Training - IPexpert, Inc.
> > IPexpert Sr. Technical Instructor
> >
> > A Cisco Learning Partner - We Accept Learning Credits!
> >
> > smorris@ipexpert.com
> >
> > Telephone: +1.810.326.1444
> > Fax: +1.810.454.0130
> > http://www.ipexpert.com
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > Of slevin kremera
> > Sent: Friday, October 05, 2007 10:42 PM
> > To: devecchio turner
> > Cc: Cisco certification
> > Subject: Re: logging buffered
> >
> > i am very good at navigating the doc cd..thanks for the advice
> >
> > by the way it says this
> >
> > The *logging console* command limits the logging messages displayed
> > on
> the
> > console terminal to messages with a level number at or below the
> specified
> > severity level, which is specified by the *level* argument.
> >
> > On 10/6/07, devecchio turner <dt30083@gmail.com> wrote:
> > >
> > > The documentaion cd says what?
> > >
> > > Www.cisco.com/univercd.. merymo will server you much better if you
> > > look it up.. And it will get you used to navigating the doc cd..
> > >
> > > On 10/5/07 9:13 PM, "slevin kremera" <slevin.kremera@gmail.com> wrote:
> > >
> > > > logging buffered buffersize level
> > > >
> > > > when u put the level as 7 ,will it log everything from 0-7?
> > > >
> > > > ________________________________________________________________
> > > > ____ ___ Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> >
> > ____________________________________________________________________
> > ___ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:12 ART