From: slevin kremera (slevin.kremera@gmail.com)
Date: Sat Oct 06 2007 - 00:22:57 ART
Scott..
thats what i said..the only difference is u went to command reference and i
went to configuration
sooooooo
On 10/6/07, Scott Morris <swm@emanon.com> wrote:
>
> Except that under "Usage Guidelines" for the same command, it very
> specifically states:
>
> "Specifying a level causes messages at that level and numerically lower
> levels to be sent to the console (TTY lines). See Table 9 for a list of
> the
> level arguments."
>
> Soooooo.... Sometimes it takes a bit of reading along the way and not
> just
> the top part!
>
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hnm_r/
> nmg_02h.htm#wp1067755
>
> Just think about the idea that not everything can be memorized and in the
> lab, the DocCD is your only friend. So it's good to get to know it very
> well before hand!
>
> HTH,
>
>
> Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
> JNCIE-M
> #153, CISSP, et al.
> CCSI/JNCI-M/JNCI-ER
> VP - Technical Training - IPexpert, Inc.
> IPexpert Sr. Technical Instructor
>
> A Cisco Learning Partner - We Accept Learning Credits!
>
> smorris@ipexpert.com
>
> Telephone: +1.810.326.1444
> Fax: +1.810.454.0130
> http://www.ipexpert.com
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> slevin kremera
> Sent: Friday, October 05, 2007 10:42 PM
> To: devecchio turner
> Cc: Cisco certification
> Subject: Re: logging buffered
>
> i am very good at navigating the doc cd..thanks for the advice
>
> by the way it says this
>
> The *logging console* command limits the logging messages displayed on the
> console terminal to messages with a level number at or below the specified
> severity level, which is specified by the *level* argument.
>
> On 10/6/07, devecchio turner <dt30083@gmail.com> wrote:
> >
> > The documentaion cd says what?
> >
> > Www.cisco.com/univercd.. merymo will server you much better if you
> > look it up.. And it will get you used to navigating the doc cd..
> >
> > On 10/5/07 9:13 PM, "slevin kremera" <slevin.kremera@gmail.com> wrote:
> >
> > > logging buffered buffersize level
> > >
> > > when u put the level as 7 ,will it log everything from 0-7?
> > >
> > > ____________________________________________________________________
> > > ___ Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:12 ART