From: Gary Duncanson (gary.duncanson@googlemail.com)
Date: Thu Oct 04 2007 - 20:35:16 ART
Hi Lim,
Check the routing table surely?
sh ip route ospf
You should see the administrative distance and the cost amongst other
things.
Have a good look at Wendall Odom - Chapter 11 'IGP Route Redistribution,
Route Summarization and Default Routing' for uses of the distance command
for RIP/EIGRP and OSPF.
This CCO link has examples too.
http://www.cisco.com/en/US/docs/ios/12_0/np1/configuration/guide/1cospf.html#wp6616
HTH
Gary
----- Original Message -----
From: "Toh Soon, Lim" <tohsoon28@gmail.com>
To: <ccielab@groupstudy.com>
Sent: Friday, October 05, 2007 12:05 AM
Subject: How to verify "distance ospf"?
> Hi Group,
>
> This is a trivial question.
>
> I have configured "distance ospf inter-area 125" under an OSPF process.
> Understand that the distance for intra-area and external routes will
> remain
> 110.
>
> What command to verify it? I have tried various commands such as "sh ip
> os",
> "sh ip proto", etc. Can't find it. Maybe I have overlooked. Need a little
> help from the Group :-)
>
>
> Thank you.
>
> B.Rgds,
> Lim TS
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:12 ART