From: Cecil Wilson (Cecil.Wilson@flextronics.com)
Date: Thu Oct 04 2007 - 19:59:33 ART
Thanks for all your response, I think I have a pretty good idea of how
this command works, now the links were VERY helpful
Thanks
Cecil G. Wilson
IT Network Services
Office: (901) 215-2710
Cell: (901) 601-6201
VoIP 104-2710
FLEX Logistics
cecil.wilson@flextronics.com
-----Original Message-----
From: subodh.rawat@wipro.com [mailto:subodh.rawat@wipro.com]
Sent: Thursday, October 04, 2007 3:12 PM
To: Cecil Wilson; ccielab@groupstudy.com
Subject: RE: BGP next hop self
Cecil,
You can check this
http://www.cisco.com/warp/public/459/bgp-toc.html#bgpnexthop
Thanks
~Subodh
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Cecil Wilson
Sent: Friday, October 05, 2007 12:02 AM
To: Joseph Brunner; ccielab@groupstudy.com
Subject: BGP next hop self
Hello GS
Can explain the next hop self command in BGP? Or any links that has
a good explanation of the command?
Thanks
Cecil G. Wilson
IT Network Services
Office: (901) 215-2710
Cell: (901) 601-6201
VoIP 104-2710
FLEX Logistics
cecil.wilson@flextronics.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joseph Brunner
Sent: Friday, August 24, 2007 7:02 PM
To: ccielab@groupstudy.com
Subject: what is in there...(ETHERTYPES)
"only what you take with you"
Rack13R4(config)#access-list 101 permit ip any any precedence ?
<0-7> Precedence value
critical Match packets with critical precedence (5)
flash Match packets with flash precedence (3)
flash-override Match packets with flash override precedence (4)
immediate Match packets with immediate precedence (2)
internet Match packets with internetwork control precedence (6)
network Match packets with network control precedence (7)
priority Match packets with priority precedence (1)
routine Match packets with routine precedence (0)
While this works great to remember IP PREC number to name (for those
annoying wred configs) can anyone give me a similar helpful way to find
out the ethertype of IP, ARP, PVST+, etc. from either capture/deny of
traffic on a router/switch, etc.
Thanks,
Joe
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:12 ART