QoS - Rule of Thumb - in a MPLS environment.

From: Cisco Nuts (cisconuts@hotmail.com)
Date: Thu Oct 04 2007 - 14:30:34 ART

• Next message: Darren Johnson: "Frame-relay traffic shaping."
• Previous message: Scott Morris: "RE: alias in lab configuration"
• Next in thread: Scott Morris: "RE: QoS - Rule of Thumb - in a MPLS environment."
• Maybe reply: Scott Morris: "RE: QoS - Rule of Thumb - in a MPLS environment."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi:

Does any one have a rule of thumb when configuring the qos-group feature in
QoS in a MPLS environement, specifically for the CCIE-SP Lab exam?

Under what circumstances would you set the qos-group inbound from the CE and
match it outbound on the PE?

Or, set it inbound in the last PE router before matching it outbound towards
the CE and setting your qos policy?

What would give hint within the question to perform this?

Any help is appreciated.

Thx.

• Next message: Darren Johnson: "Frame-relay traffic shaping."
• Previous message: Scott Morris: "RE: alias in lab configuration"
• Next in thread: Scott Morris: "RE: QoS - Rule of Thumb - in a MPLS environment."
• Maybe reply: Scott Morris: "RE: QoS - Rule of Thumb - in a MPLS environment."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:12 ART