RE: alias in lab configuration

From: Brad Ellis (brad@ccbootcamp.com)
Date: Thu Oct 04 2007 - 01:03:34 ART


I definitely wouldn't want to leave any aliases on the devices. It
certainly won't help your score any.

Having extra configs in the devices can be a good/bad thing. If you
can't figure out how to do something and it will effect multiple parts
of the lab later, and you have an alternative method of doing it (even
if the instructions say not too), I suggest doing it, and just losing
the few points for the unallowed config, vs. losing all the points
because everything down the chain that followed wouldn't work either.
(That is probably the longest sentence I've typed; ever!)

thanks,
Brad Ellis
CCIE#5796 (R&S / Security)
CCSI# 30482
CEO / President
CCBOOTCAMP - A Cisco Sponsored Organization (SO)
Email: brad@ccbootcamp.com
Toll Free: 877-654-2243
Direct: +1-702-968-5100 = Outside the USA
FAX: +1-702-446-8012
YES! We take Cisco Learning Credits!
Training And Remote Racks: http://www.ccbootcamp.com

Register to win a free iPhone! http://www.ccbootcamp.com/iphone.html

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Colin McNamara
Sent: Wednesday, October 03, 2007 8:11 PM
To: ccielab@groupstudy.com
Subject: Re: alias in lab configuration
Importance: Low

When in doubt, I suggest erring on the side of making the proctors life
easier.

--Colin

On Wed, 2007-10-03 at 19:23 -0700, Sam Eckert wrote:
> I heard the same thing. Proctors do not care if the alias commands are
still
> there, but if it screws up their grading script that they run, then
you are
> shit out of luck unless you pay for a re-grade. In that scenerio I do
not
> know if they would count it against you or not. I will ask the next
time I
> am in the lab.
>
> On 10/3/07, Eric Dobyns <eric_dobyns@yahoo.com> wrote:
> >
> > I had a proctor tell me to be careful with aliases if they might
interfere
> > with commands their scripts run--i.e. make sure your alias doesn't
hide a
> > command they would run.
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> > Guyler, Rik
> > Sent: Wednesday, October 03, 2007 11:07 AM
> > To: 'Cisco certification'
> > Subject: RE: alias in lab configuration
> >
> > Sure, you can use alias comands if you want to. I've used them
before but
> > I'm not so sure that they really saved me much time but no problem
using
> > them...unless for some reason your lab says not to. ;-)
> >
> > Rik
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> > Venkey
> > Sent: Wednesday, October 03, 2007 11:14 AM
> > To: ccielab@groupstudy.com
> > Subject: alias in lab configuration
> >
> > Hi
> >
> > Is it allowed to use alias in the Cisco LAB exam, just for speeding
up.
> >
> > Tks.
> > Jay
> >
> >



This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:12 ART