From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Wed Oct 03 2007 - 22:36:04 ART
Rack1R1(config)#bridge 1 protocol ieee
Rack1R1(config)#int tu 0
Rack1R1(config-if)#bridge-group ?
% Unrecognized command
Rack1R1(config-if)#bridge-group 1
% This command is an unreleased and unsupported feature
Rack1R1(config-if)#
*Mar 1 02:12:53.887:
Note: A random Spanning Tree Bridge Identifier address of 0000.0c6b.ac00
has been chosen for Bridge Group 1 since there is no mac address
associated with the selected interface.
*Mar 1 02:12:53.887:
Ensure that this address is unique.
Rack1R1(config-if)#do sho run int tu 0
Building configuration...
Current configuration : 56 bytes
!
interface Tunnel0
no ip address
bridge-group 1
end
Rack1R1(config-if)#
HTH,
Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
On Oct 3, 2007, at 6:04 PM, Sam Eckert wrote:
> I want to create a bridge using a GRE tunnel and not L2TPv3. How
> can I do
> this? The tunnel interface will not take the bridge group command.
>
> ______________________________________________________________________
> _
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:11 ART