From: Rajendra Armal (rarmal) (rarmal@cisco.com)
Date: Sun Sep 30 2007 - 00:05:17 ART
For menu problem. One way to get going is to telnet that router from
some other router and then save config and reload it.
/Armal
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie1101
Sent: Sunday, September 09, 2007 8:49 AM
To: Cisco certification
Subject: Re: When you get locked out of the equipment ....
Hi,
I would like to know how would one get out if they get stuck on a
router? I was craeating a menu on a router but I came out of enable mode
and did not enter these following lines
menu NOC text 3. Exit
menu NOC command exit
and I did another mistake by envoking the menu and the router
locked me out. The question I have is :-
1) I was not able to break out of this, tried Ctrl-C, Ctrl-D, Ctrl-Break
but nothing worked. So how does one solve this problem ?
2) Also, if you accidentally change say a vlan on a switch interface to
a different vlan and you do not recall the original vlan, how do you go
abt.
it in the real
exam. Ask the proctor for help ? Copy all the original configs
prior
to the labs ?
Thank you,
ccie1101.
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:17 ART