From: Carlos glez (cciecarlogon@gmail.com)
Date: Wed Sep 26 2007 - 21:25:34 ART
is this lab 10 IE version 4?
On 9/26/07, Eric Leung <eric.lwc@gmail.com> wrote:
>
> Hi Nic,
>
> Would you post your multicast configuration? From my understanding, you
> can
> have multiple rp-announce-filters for different RPs.
>
> Eric.
>
>
> 2007/9/26, nicky noname <cisco2study@gmail.com>:
> >
> > Hello,
> >
> > I had 2 different RP configured for different MCAST groups and another
> > device configured for the MA.
> >
> > I thought I needed to match the MCAST groups that were coming from the
> > RP's
> > to a RP-ANNOUNCE list on the MA, for each RP.
> >
> > For some reason i was only getting 1 RP announcement through to the
> > MA...and
> > subsequently one group was distributed.
> >
> > I removed the announce-filters from the MA and both RP's were announced
> > correctly, with there corresponding groups. ( there are no issues with
> me
> > a
> > mistake on the access-list or anything)
> >
> > 1- I don't understand why i couldn't have 2 rp-announce filters in
> place,
> > one for each rp?
> >
> > 2- When do I need to use the RP-ANNOUNCE filter. I thought we needed to
> > match what we had configured on the RP's?
> >
> > Your help is appreciated.
> > nic
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:16 ART