From: Carlos Trujillo Jimenez (nergal888@hotmail.com)
Date: Wed Sep 26 2007 - 20:47:58 ART
Hi QOS EXPERTS!
A question for all of you.
I have a router connected to a dsl modem, obviously the dsl modem has one
fastethernet interface, and one dsl interface, but I have no administration
of the dsl modem, only of the router connected to it. the dsl modem is only
doing bridging, and the router connected to it is doing the routing process.
If I want to configure LLQ using MQOS in the router, I attach the service
policy created in the output direction of the fastethernet interface of the
router connected to the dsl modem (wan interface), all these QOS setting
will work??
I have heard that QOS settings only work when the interface becomes
congested, But the bottleneck begins at the egress interface of the dsl
modem, not at the egress interface of the router, so its very improbable
that my router ethernet interface become congested, meaning the qos features
will not work at the egress interface of the router.
so my question is, the best place to attach the service policy configuration
is at the egress interface of the dsl modem??
another, If I dont have administration of that box, Can I do some QOS at the
router egress interface??
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:16 ART