From: Scott Morris (smorris@ipexpert.com)
Date: Wed Sep 26 2007 - 17:37:10 ART
It permits routes where the network portion is from 2.0.0.0 to 2.1.255.255
and the network mask is less than or equal to 32 bits (15-32)
There are two pieces to a prefix list. One says the "network/route" is
within a particular range. The second will give criteria about mask length.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE-M
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
VP - Technical Training - IPexpert, Inc.
IPexpert Sr. Technical Instructor
A Cisco Learning Partner - We Accept Learning Credits!
smorris@ipexpert.com
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
groupstudy email
Sent: Wednesday, September 26, 2007 2:56 PM
To: ccielab@groupstudy.com
Subject: Prefix List Question
Guys,
I have a quick question on prefix-lists. It is difficult to find good info
on this.
What exactly does this line do:
ip prefix-list test seq 300 permit 2.0.0.0/15 le 32
What ranges does it cover.
I'm really confused by this.
Thanks in advance.
S. Rick
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:16 ART