From: Scott Morris (smorris@ipexpert.com)
Date: Wed Sep 26 2007 - 15:31:33 ART
You can do the same thing and still use "eui-64" on your address line by
simply setting:
Ipv6 address fe80::2 link-local
On all of R2's interfaces... The "eui-64" portion picks up the link-local
address.
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE-M
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
VP - Technical Training - IPexpert, Inc.
IPexpert Sr. Technical Instructor
A Cisco Learning Partner - We Accept Learning Credits!
smorris@ipexpert.com
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Gregory Gombas
Sent: Wednesday, September 26, 2007 10:07 AM
To: Scott Morris
Cc: slevin kremera; Cisco certification
Subject: Re: ipv6 eui-64
If I doesn't specifically say use EUI-64 I tend to use the router number as
the host address.
For example on network 2001:CCIE:123:26::/64
R2 - 2001:CCIE:123:26::2
R6 - 2001:CCIE:123:26::6
Makes it a lot easier to type out when you try to ping each other...
On 9/25/07, Scott Morris <smorris@ipexpert.com> wrote:
> I have no idea about what lab you are dealing with (I assume by
> version number it's IE). But in the real lab, if you are not given
> specific instructions/restrictions, you are free to do whatever method you
want.
> Results are the important part.
>
> HTH,
>
>
> Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
> JNCIE-M #153, CISSP, et al.
> CCSI/JNCI-M/JNCI-ER
> VP - Technical Training - IPexpert, Inc.
> IPexpert Sr. Technical Instructor
>
> A Cisco Learning Partner - We Accept Learning Credits!
>
> smorris@ipexpert.com
>
> Telephone: +1.810.326.1444
> Fax: +1.810.454.0130
> http://www.ipexpert.com
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of slevin kremera
> Sent: Tuesday, September 25, 2007 8:21 PM
> To: Cisco certification
> Subject: ipv6 eui-64
>
> I have this consfusion with EUI-64
>
> for example take task 6.1 of lab 10 Vol4.1
>
> on the interface between r2 and r6,the question does not say
> anything,so i used eui-64,but on the serial link between r1 and r3 i
> didnot.so whats the thumb rule here
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:16 ART