From: Cecil Wilson (Cecil.Wilson@flextronics.com)
Date: Wed Sep 26 2007 - 14:53:52 ART
thanks
Cecil G. Wilson
IT Network Services
Office: (901) 215-2710
Cell: (901) 601-6201
cecil.wilson@flextronics.com
-----Original Message-----
From: Gregory Gombas [mailto:ggombas@gmail.com]
Sent: Wednesday, September 26, 2007 11:36 AM
To: Cecil Wilson
Cc: Eric Leung; nicky noname; Cisco certification
Subject: Re: Difference between N1 and N2 routes
N1 and N2 are NSSA external routes.
N1 is similar to E1, cost changes as it goes through network.
N2 is similar to E2, the cost is fixed as it goes through network.
Both types will be translated to E1 and E2 respectively when they reach
the ABR.
HTH
On 9/26/07, Cecil Wilson <Cecil.Wilson@flextronics.com> wrote:
> Hi GS
> can someone tell me the dif between N1 and N2 routes? These are
> route that are redistribute from rip into ospf AS
>
> Thanks for all input
>
>
> Cecil G. Wilson
> IT Network Services
> Office: (901) 215-2710
> Cell: (901) 601-6201
> cecil.wilson@flextronics.com
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of Eric Leung
> Sent: Wednesday, September 26, 2007 10:15 AM
> To: nicky noname
> Cc: Cisco certification
> Subject: Re: multicast autorp
>
> Hi Nic,
>
> Would you post your multicast configuration? From my understanding,
> you can have multiple rp-announce-filters for different RPs.
>
> Eric.
>
>
> 2007/9/26, nicky noname <cisco2study@gmail.com>:
> >
> > Hello,
> >
> > I had 2 different RP configured for different MCAST groups and
> > another
>
> > device configured for the MA.
> >
> > I thought I needed to match the MCAST groups that were coming from
> > the
>
> > RP's to a RP-ANNOUNCE list on the MA, for each RP.
> >
> > For some reason i was only getting 1 RP announcement through to the
> > MA...and subsequently one group was distributed.
> >
> > I removed the announce-filters from the MA and both RP's were
> > announced correctly, with there corresponding groups. ( there are no
> > issues with me a mistake on the access-list or anything)
> >
> > 1- I don't understand why i couldn't have 2 rp-announce filters in
> > place, one for each rp?
> >
> > 2- When do I need to use the RP-ANNOUNCE filter. I thought we needed
> > to match what we had configured on the RP's?
> >
> > Your help is appreciated.
> > nic
> >
> > ____________________________________________________________________
> > __ _ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> Legal Disclaimer:
> The information contained in this message may be privileged and
> confidential. It is intended to be read only by the individual or
> entity to whom it is addressed or by their designee. If the reader of
> this message is not the intended recipient, you are on notice that any
> distribution of this message, in any form, is strictly prohibited. If
> you have received this message in error, please immediately notify the
> sender and delete or destroy any copy of this message
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:16 ART