From: Clay K Auch \(clauch\) (clauch@cisco.com)
Date: Wed Sep 26 2007 - 13:45:24 ART
Cecil,
One of the best ways to find out is to execute "sh ip route" and look at the key codes. You'll appreciate it more (imho) if there is an action associated with your learning the answer :)
Also, if you haven't already done so ... I recommend you read the document for which I have provided the link, below:
http://www.cisco.com/warp/public/104/1.html#t33
Enjoy!
Clay
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Cecil Wilson
Sent: Wednesday, September 26, 2007 11:49 AM
To: Eric Leung; nicky noname
Cc: Cisco certification
Subject: Difference between N1 and N2 routes
Hi GS
can someone tell me the dif between N1 and N2 routes? These are
route that are redistribute from rip into ospf AS
Thanks for all input
Cecil G. Wilson
IT Network Services
Office: (901) 215-2710
Cell: (901) 601-6201
cecil.wilson@flextronics.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Eric Leung
Sent: Wednesday, September 26, 2007 10:15 AM
To: nicky noname
Cc: Cisco certification
Subject: Re: multicast autorp
Hi Nic,
Would you post your multicast configuration? From my understanding, you can have multiple rp-announce-filters for different RPs.
Eric.
2007/9/26, nicky noname <cisco2study@gmail.com>:
>
> Hello,
>
> I had 2 different RP configured for different MCAST groups and another
> device configured for the MA.
>
> I thought I needed to match the MCAST groups that were coming from the
> RP's to a RP-ANNOUNCE list on the MA, for each RP.
>
> For some reason i was only getting 1 RP announcement through to the
> MA...and subsequently one group was distributed.
>
> I removed the announce-filters from the MA and both RP's were
> announced correctly, with there corresponding groups. ( there are no
> issues with me a mistake on the access-list or anything)
>
> 1- I don't understand why i couldn't have 2 rp-announce filters in
> place, one for each rp?
>
> 2- When do I need to use the RP-ANNOUNCE filter. I thought we needed
> to match what we had configured on the RP's?
>
> Your help is appreciated.
> nic
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:16 ART