From: Ryan Morris (ryan@egate.net)
Date: Wed Sep 26 2007 - 11:45:08 ART
FYI I had full access to all the documentation on UniverCD and the
stuff that has moved to CCO except for one page that had a
broken link. This has been discussed on the list before. I had no
problem reaching the 3550 and 3560 guides on CCO via the UniverCD links.
R.
On Wed, 26 Sep 2007, Gregory Gombas wrote:
> That IF they give you access to the 3550 documentation!
>
> On 9/26/07, ccie1101 <ccie1101@gmail.com> wrote:
> > Okay thanks again dee .... :).
> >
> > ccie1101.
> >
> > On 9/26/07, dee <devecchio.turner@sbcglobal.net> wrote:
> > >
> > > DOC-CD again..ie default
> > >
> > > port-channel load-balance
> > >
> > > Use the port-channel load-balance global configuration command to set the
> > > load-distribution method among the ports in the EtherChannel. Use the no
> > > form of this command to return to the default setting.
> > >
> > > port-channel load-balance {dst-mac | src-mac}
> > >
> > > no port-channel load-balance
> > > Syntax Description
> > >
> > > dst-mac
> > >
> > >
> > > Load distribution is based on the destination host MAC address. Packets to
> > > the same destination are sent on the same port, but packets to different
> > > destinations are sent on different ports in the channel.
> > >
> > > src-mac
> > >
> > >
> > > Load distribution is based on the source MAC address. Packets from
> > > different hosts use different ports in the channel, but packets from the
> > > same host use the same port.
> > >
> > > Defaults
> > >
> > > The default is src-mac.
> > >
> > >
> > >
> > > On 9/26/07 12:54 AM, "ccie1101" <ccie1101@gmail.com> wrote:
> > >
> > > Thanks Brian and Dee :) I was looking at the 3550 ver12.2(37)SE but it
> > > does not have the command reference there ..... I will need to improve my
> > > navigation skills on the Doc CD.
> > >
> > > [1] On another note, if we create a channel and do not explicitly enable
> > > port-channel load balance, would the channel use its default value ?
> > >
> > > Thank you,
> > >
> > > ccie1101.
> > >
> > > On 9/26/07, *dee* <devecchio.turner@sbcglobal.net> wrote:
> > >
> > > Go to the command reference... In the real-lab this kind of stuff will
> > > save
> > > you lots of time..
> > >
> > > port-channel load-balance
> > >
> > > Use the port-channel load-balance global configuration command to set the
> > > load-distribution method among the ports in the EtherChannel. Use the no
> > > form of this command to return to the default setting.
> > >
> > > port-channel load-balance {dst-mac | src-mac}
> > >
> > > no port-channel load-balance
> > > Syntax Description
> > >
> > > dst-mac
> > >
> > >
> > > Load distribution is based on the destination host MAC address. Packets to
> > > the same destination are sent on the same port, but packets to different
> > > destinations are sent on different ports in the channel.
> > >
> > > src-mac
> > >
> > >
> > > Load distribution is based on the source MAC address. Packets from
> > > different
> > > hosts use different ports in the channel, but packets from the same host
> > > use
> > > the same port.
> > >
> > > Defaults
> > >
> > > The default is src-mac.
> > > Command Modes
> > >
> > > Global configuration
> > > Command History
> > > Release
> > >
> > > Modification
> > >
> > > 12.1(4)EA1
> > >
> > >
> > > This command was introduced.
> > >
> > > Usage Guidelines
> > >
> > > When src-mac is used, load distribution based on the source and
> > > destination
> > > IP address is also enabled. For all IP traffic being routed, the switch
> > > chooses a port for transmission based on the source and destination IP
> > > address. Packets between two IP hosts always use the same port for packet
> > > transmission, but packets between any other pair of hosts might use a
> > > different transmission port.
> > > Examples
> > >
> > > This example shows how to set the load-distribution method to dst-mac:
> > >
> > > Switch(config)# port-channel load-balance dst-mac
> > >
> > >
> > >
> > >
> > >
> > > On 9/26/07 12:21 AM, "ccie1101" <ccie1101@gmail.com> wrote:
> > >
> > > > Hi,
> > > > I was going over the DOC CD and I could not find the default valud
> > > for
> > > > port-channel load-balance for the 3550 ..... For the 3560 the default
> > > for
> > > > the port-channel load-balance is
> > > > src-mac.
> > > >
> > > > * Can someone let me know what is default for port-channel
> > > load-balance
> > > > on the 3550 ?*
> > > >
> > > > Many thanks,
> > > >
> > > > ccie1101.
> > > >
> > > > _______________________________________________________________________
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:16 ART