From: Michael Stewart (skidazzle@gmail.com)
Date: Wed Sep 26 2007 - 08:50:16 ART
under the interface it is actually ip dhcp client lease <days>
i am not sure if this can be broken into hours..
kron is the best solution with a 3 hour reoccurance, and run cli "renew dhcp
<interface>"
hth,
michael
On 9/26/07, Meried Bekele <meriedbekele@gmail.com> wrote:
>
> OR
>
> From the client side, you can use either of the two things:
>
> 1. Under interface configuration - 'ip dhcp lease' command
>
> 2. Command scheduler - 'kron occurence' and 'kron policy-list'
>
> Best Regards,
>
>
> On 9/26/07, Ryan Morris <ryan@egate.net> wrote:
> >
> > This is asking you to set the lease time to 3 hours in the router acting
> > as a dhcp server. Under the pool configuration:
> >
> > lease <days> <hours>
> >
> > R.
> >
> >
> > On Wed, 26 Sep 2007, slevin kremera wrote:
> >
> > > Hi EXPERTS
> > >
> > > how do i make the router generate a dhcp request packet to renew its
> > > ethernet interface ip address every 3 hours
> > >
> > > SK
> > >
> > >
> _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
> --
> Meried B.
> Network Operations Senior Expert
> National Data Center (PMO)
> Mob. +251 91 1349519
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:16 ART