From: Derek Pocoroba (dpocoroba@gmail.com)
Date: Thu Sep 20 2007 - 14:28:43 ART
Carlos,
As I recall If you apply a service policy to a frame class. It will not
actually be active until you enable "frame-relay traffic-shape" As for
changing the CIR that would depend on how the question is stated. You could
clarify that one with the proctor at the time.
HTH
On 9/20/07, Carlos Trujillo Jimenez <nergal888@hotmail.com> wrote:
>
> Hi you all!
>
> If I want to give priority to certain application running between two
> remote
> sites interconnected them by a frame relay link, initially there is no
> traffic shaping enabled, but If I want to prioritize a given application,
> first classifying it by MQOS as a result I have a POLICY-MAP
>
> the policy-map I apply it as a "service policy output" within the
> map-class
> and then, the map-class I Put withing the dlci.
>
> For all these actions My question is, I must first enable traffic
> shaping??
>
> If do, the default cir belongs to 56000, but If the task does not mention
> the cir, I must return the default cir value of the serial interface???
>
> _________________________________________________________________
> MSN Amor: busca tu = naranja http://latam.msn.com/amor/
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Derek Pocoroba CCIE #18559
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:14 ART