From: Gary Duncanson (gary.duncanson@googlemail.com)
Date: Thu Sep 20 2007 - 14:06:50 ART
No problem Scott,
Im glad things all worked out in the end.
Regards
Gary
----- Original Message -----
From: "Scott Vermillion" <scott_ccie_list.com@it-ag.com>
To: "'David Prall'" <dcp@dcptech.com>; "'Cisco certification'"
<ccielab@groupstudy.com>; "'Cisco certification'" <cisco@groupstudy.com>
Sent: Thursday, September 20, 2007 5:08 PM
Subject: RE: Anybody Have A Working ADSL Config for UK (BT)?? - RESOLVED
> Well all, it took quite a bit longer than I would have guessed, but my
> guys
> over in the UK finally got around to flashing some new code on the box (a
> 3845) and apparently all is stable at this point. Thanks as always
> David!!!
> Thanks also be to Gary for volunteering to lend a hand "from within."
> What
> a group!
>
> Cheers,
>
> Scott
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> David Prall
> Sent: Monday, September 10, 2007 6:55 PM
> To: 'Scott M Vermillion'; 'Cisco certification'; 'Cisco certification'
> Subject: RE: Anybody Have A Working ADSL Config for UK (BT)??
>
> Make sure you have the latest firmware loaded
> http://www.cisco.com/pcgi-bin/tablebuild.pl/800
>
> The firmware is most likely the cause of the flapping.
>
> For config something like this should work:
>
> interface ATM0
> no ip address
> no ip redirects
> no ip proxy-arp
> no atm ilmi-keepalive
> pvc bt 0/38
> encapsulation aal5mux ppp dialer
> dialer pool-member 1
> !
> dsl operating-mode auto
> dsl lom 200
> !
> !
> interface Dialer1
> ip address negotiated previous
> no ip redirects
> no ip proxy-arp
> encapsulation ppp
> dialer pool 1
> dialer-group 1
> priority-group 1
> no cdp enable
> ppp authentication chap callin
> ppp chap hostname <userid>
> ppp chap password <password>
> !
> ip route 0.0.0.0 0.0.0.0 Dialer1
> !
>
> David
>
> --
> http://dcp.dcptech.com
>
>
>> -----Original Message-----
>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
>> Behalf Of Scott M Vermillion
>> Sent: Monday, September 10, 2007 8:33 PM
>> To: 'Cisco certification'; 'Cisco certification'
>> Subject: OT: Anybody Have A Working ADSL Config for UK (BT)??
>>
>> Hi all,
>>
>>
>> I've got a new ADSL connection I'm trying to bring up
>> remotely in the UK (I
>> have a guy on the ground there but he's not too up on this
>> stuff). It's
>> constantly flapping up and down. I've looked at quite a
>> number of example
>> configs for the UK and all looks good. I know we've got a
>> good number of
>> list members in the UK and I think I've even seen some posts
>> related to
>> ADSL.
>>
>>
>>
>> Thanks much,
>>
>>
>>
>> Scott
>>
>> ______________________________________________________________
>> _________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:14 ART