From: Ronnie Angello (ronnie.angello@gmail.com)
Date: Thu Sep 20 2007 - 12:46:37 ART
Just to add a classic example to what Scott said, say you you need to match
multiple DSCP values in a class-map. You don't want to use match-all if you
need to match AF31 and EF. That class-map will not match anything because a
packet can't be marked with both DSCP values. You would need to use
match-any in that case.
On 9/20/07, Scott Morris <swm@emanon.com> wrote:
>
> When you have multiple things that must match (AND) or multiple things
> that
> may match (OR)
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Radioactive Frog
> Sent: Thursday, September 20, 2007 4:36 AM
> To: Cisco certification; Cisco certification
> Subject: match-any vs match all
>
> When to use "class-map match-all <abcd>" and when "class-map match-any
> <abcd>"
>
> Advantage/dis-advantage ?
>
> Frog
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Ronald Angello CCIE #17846
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:14 ART