From: Biggs, Jeff \(M/CIO/BIE\) (JBiggs@usaid.gov)
Date: Thu Sep 20 2007 - 10:39:10 ART
This is what we are getting from the router....
Jeffrey Biggs
Sr. Network Engineer
M/CIO/BIE
CCNP, CCDA
240-646-5003
jbiggs@usaid.gov
This e-mail is intended for the addressee only. If you are not the intended recipient, please be aware that the unauthorised use or disclosure of the information it contains, or the unauthorised copying or re-transmission of the e-mail are strictly prohibited. Such action may result in legal proceedings. If the e-mail has been sent to you in error, please accept our apologies, advise the sender as soon as possible and then delete the message. Under the Freedom of Information Act 2000 / Data Protection Act 1998, the contents of this e-mail, whether it is marked confidential or otherwise, may be disclosed.
-----Original Message-----
From: Haley, Kevin(M/IRM/TSI)
Sent: Thursday, September 20, 2007 8:39 AM
To: Biggs, Jeff (M/CIO/BIE)
Subject: RE: Reverse Telnet issue
False alarm, still not working.
MISSION_2_CORE#sh line 1
Tty Line Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int
* 1 1 AUX 9600/9600 - inout - - - 0 0 0/0 -
Line 1, Location: "", Type: ""
Length: 24 lines, Width: 80 columns
Baud rate (TX/RX) is 9600/9600, no parity, 1 stopbits, 8 databits
Status: Ready, Active, No Exit Banner, CTS Raised, Modem Signals Polled
Capabilities: Modem Callout, Modem RI is CD
Modem state: Ready
Modem hardware state: CTS* DSR* DTR RTS
Special Chars: Escape Hold Stop Start Disconnect Activation
^^x none - - none
Timeouts: Idle EXEC Idle Session Modem Answer Session Dispatch
00:10:00 never none not set
Idle Session Disconnect Warning
never
Login-sequence User Response
00:00:30
Autoselect Initial Wait
not set
Modem type is unknown.
Session limit is not set.
Time since activation: never
Editing is enabled.
History is enabled, history size is 20.
DNS resolution in show commands is enabled
Full user help is disabled
Allowed input transports are pad telnet rlogin lapb-ta mop udptn v120 ssh.
Allowed output transports are pad telnet rlogin lapb-ta mop udptn v120 ssh.
Preferred transport is telnet.
No output characters are padded
No special data dispatching characters
MISSION_2_CORE#telnet 206.118.87.225 2001
Trying 206.118.87.225, 2001 ...
% Connection timed out; remote host not responding
MISSION_2_CORE#
Kevin Haley
Sr. Network Engineer/USAID
GSAT: 240.646.5015
RRHB: 202.712.5769
-----Original Message-----
From: Biggs, Jeff (M/CIO/BIE)
Sent: Wednesday, September 19, 2007 1:27 PM
To: Haley, Kevin(M/IRM/TSI)
Subject: RE: Reverse Telnet issue
Do you have the show line 1 output?
Jeffrey Biggs
Sr. Network Engineer
M/CIO/BIE
CCNP, CCDA
240-646-5003
jbiggs@usaid.gov
This e-mail is intended for the addressee only. If you are not the intended recipient, please be aware that the unauthorised use or disclosure of the information it contains, or the unauthorised copying or re-transmission of the e-mail are strictly prohibited. Such action may result in legal proceedings. If the e-mail has been sent to you in error, please accept our apologies, advise the sender as soon as possible and then delete the message. Under the Freedom of Information Act 2000 / Data Protection Act 1998, the contents of this e-mail, whether it is marked confidential or otherwise, may be disclosed.
-----Original Message-----
From: Haley, Kevin(M/IRM/TSI)
Sent: Wednesday, September 19, 2007 1:25 PM
To: Biggs, Jeff (M/CIO/BIE)
Subject: RE: Reverse Telnet issue
MISSION_2_CORE#sh line
Tty Line Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int
* 0 0 CTY - - - - - 31 0 0/0 -
* 1 1 AUX 9600/9600 - inout - - - 0 0 0/0 -
66 66 TTY 9600/9600 - - - - - 0 0 0/0 -
706 706 VTY - - - - - 3 0 0/0 -
707 707 VTY - - - - - 0 0 0/0 -
708 708 VTY - - - - - 0 0 0/0 -
709 709 VTY - - - - - 0 0 0/0 -
710 710 VTY - - - - - 0 0 0/0 -
Line(s) not in async mode -or- with no hardware support:
2-65, 67-705
Kevin Haley
Sr. Network Engineer/USAID
GSAT: 240.646.5015
RRHB: 202.712.5769
-----Original Message-----
From: Biggs, Jeff (M/CIO/BIE)
Sent: Wednesday, September 19, 2007 10:46 AM
To: Haley, Kevin(M/IRM/TSI)
Subject: FW: Reverse Telnet issue
Can you send me a show line 1 from the offending 3845 so we can see all the AUX port info.
Thanks,
Jeffrey Biggs
Sr. Network Engineer
M/CIO/BIE
CCNP, CCDA
240-646-5003
jbiggs@usaid.gov
This e-mail is intended for the addressee only. If you are not the intended recipient, please be aware that the unauthorised use or disclosure of the information it contains, or the unauthorised copying or re-transmission of the e-mail are strictly prohibited. Such action may result in legal proceedings. If the e-mail has been sent to you in error, please accept our apologies, advise the sender as soon as possible and then delete the message. Under the Freedom of Information Act 2000 / Data Protection Act 1998, the contents of this e-mail, whether it is marked confidential or otherwise, may be disclosed.
-----Original Message-----
From: Sadiq Yakasai [mailto:sadiqtanko@gmail.com]
Sent: Wednesday, September 19, 2007 10:39 AM
To: Gregory Gombas
Cc: Biggs, Jeff (M/CIO/BIE); ccielab@groupstudy.com
Subject: Re: Reverse Telnet issue
This is what my termserv shows for a good working line
CCIE_TermServ#sh line 1
Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int
1 TTY 9600/9600 - inout - - - 16 0 0/0 -
Line 1, Location: "", Type: ""
Length: 24 lines, Width: 80 columns
Baud rate (TX/RX) is 9600/9600, no parity, 2 stopbits, 8 databits
Status: Ready, No Exit Banner
Capabilities: No Flush-at-Activation, EXEC Suppressed, Modem Callout
Modem RI is CD
Modem state: Ready
Group codes: 0
Modem hardware state: CTS DSR DTR RTS
Special Chars: Escape Hold Stop Start Disconnect Activation
^^x none - - none
Timeouts: Idle EXEC Idle Session Modem Answer Session Dispatch
never never none not set
Idle Session Disconnect Warning
never
Login-sequence User Response
00:00:30
Autoselect Initial Wait
not set
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:14 ART