From: Donghai Zhang (zdh1207@gmail.com)
Date: Wed Sep 19 2007 - 05:35:18 ART
Sarul,that's what exactly I want to do. Only that I will make certain that
hosts should use their directly connected 3560 as gateway ,rather than the
other one which is not directly connected.
2007/9/19, Saul Arjona <saul.arjona.bueno@gmail.com>:
>
> If you really want to load balance and the hosts on both switches are on
> the same VLAN you could set a SVI interface on each switch and create two
> different HSRP groups on each interface. For one group make the active
> switch one of the 3560s and for the other group use the other 3560 as
> active.
>
> Then you could set up half of your hosts for gateway on HSRP group 1 (eg
> 10.10.10.1) and the other half for HSRP group two (eg 10.10.10.2)
> This way half of your hosts would be using one switch as gateway and the
> other half using the other switch and you would still have redundancy.
>
> my two cents
>
> -Saul
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:13 ART