From: Greg Wendel (gwendel@gmail.com)
Date: Mon Sep 17 2007 - 17:48:56 ART
Joe,
Look into the archive command. I will send you a link that I found later
that describes this process including with screenshots.
On 9/17/07, Joe Mama <jsmith1234550@gmail.com> wrote:
>
> All,
>
> Regarding saving multiple "running" configs locally on a router/switch
> using the IOS commands, what method do you take?
>
> In my lab, I have a 7206 which seems to cleanly accept a 'copy run
> ospf1' and vice-versa whereas a 1710 / 3640a / 2651xm (running 12.4)
> cannot do so without asking me if I want to erase the flash. Can
> anyone shed some light on this?
>
> Joe
>
> ------------------------7206------------------------------------
> bb1#copy ospf running-config
> Destination filename [running-config]?
>
> 948 bytes copied in 0.148 secs (6405 bytes/sec)
> ospf#
>
>
> ------------------1710-------------------
> r1#copy 1111 sta
> r1#copy run 1111
> Destination filename [1111]?
> Erase flash: before copying? [confirm]n
> Verifying checksum... OK (0x34B7)
> 1153 bytes copied in 10.376 secs (111 bytes/sec)
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Gregory Wendel Springfield VA, 22153
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:12 ART