From: Daniel_Steyn@Dell.com
Date: Mon Sep 17 2007 - 17:43:49 ART
Even though you say "no" at the prompt, it will still write your config
to flash...it simply won't clean your flash before while it does so.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joe Mama
Sent: Monday, September 17, 2007 2:48 PM
To: Cisco certification
Subject: OT: Multiple Configs -- File System Management
All,
Regarding saving multiple "running" configs locally on a router/switch
using the IOS commands, what method do you take?
In my lab, I have a 7206 which seems to cleanly accept a 'copy run
ospf1' and vice-versa whereas a 1710 / 3640a / 2651xm (running 12.4)
cannot do so without asking me if I want to erase the flash. Can
anyone shed some light on this?
Joe
------------------------7206------------------------------------
bb1#copy ospf running-config
Destination filename [running-config]?
948 bytes copied in 0.148 secs (6405 bytes/sec)
ospf#
------------------1710-------------------
r1#copy 1111 sta
r1#copy run 1111
Destination filename [1111]?
Erase flash: before copying? [confirm]n
Verifying checksum... OK (0x34B7)
1153 bytes copied in 10.376 secs (111 bytes/sec)
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:12 ART