From: Marc La Porte (marc.a.laporte@gmail.com)
Date: Mon Sep 17 2007 - 05:05:23 ART
You only have to put a default-gateway on a layer 2 switch, so if both 3560s
are layer 3 then it's not necessary on there
On 9/17/07, Donghai Zhang <zdh1207@gmail.com> wrote:
>
> Actually the distribute switches will be L3 at this moment. And the 3560s
> would be the default gateways of the hosts.The problem is which 3560 to
> set ?
>
> 2007/9/17, Marc La Porte <marc.a.laporte@gmail.com>:
> >
> > Assuming that the core switch will be L3 and the distribution switches
> > L2, I would put the SVI on the core switch and the default gateway on the
> > distribution switches
> >
> > On 9/17/07, Donghai Zhang <zdh1207@gmail.com > wrote:
> > >
> > > Dear all,
> > > I have got a problem recently. Suppose I have two catalyst 3560, as
> > > distribute switch, one catalyst 4506,as core switch. I need to set
> > > default-gateways of those hosts inside local LAN in the 3560s.Theploblem is
> > > that: in which 3560 should I set the SVI interface? If I set in one,
> > > then
> > > the hosts within the same vlan but connecting to the other switch have
> > > to
> > > travel to this switch so that they can be servced routing,thus
> > > bandwith
> > > would be waste.
> > > Anyone help me ,thanks advance.
> > >
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:12 ART