From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sun Sep 16 2007 - 17:34:16 ART
If the lab does not say you can not use tags then use them if you feel
they are needed.
As far as using PPPoFR to solve your second question you need to consider
all possible solutions and implement the simplest solution that meets the
requirements. PPPoFR is not the simplest solution in the situation you
listed below.
Lastly remember that there isn't some "secret CCIE cheat sheet" that lists
a bunch of do's and don'ts. Everything will be explained to you in your
lab booklet. The basic logic you can use for answering tasks in the lab
is: Read the task. Consider all possible solutions. Implement the
simplest solution that meets the requirements. Verify the solution. Save
your configurations. Move onto the next task.
Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
>----- Original Message -----
Subject: Can I tag routes for clarification and not clear them at the end
of lab????
Date: Sun, September 16, 2007 11:02
From: "sirus MOGHADASIAN" <cyrus.mgh@gmail.com>
> Hi GS,
>
> Can I tag routes for clarification and not clear them at the end of lab????
> so this help me to know which route comes from where, I just wonder can I
> leave these tags at the end of configurations at end of the day???
>
> another question :
>
> in OSPF scenario like connecting point-to-poin interface to
non-broadcast
> one if lab not specified the methode that I can use to accomplish this ,can
> I use for example PPP to do this task???
>
>
>
> Thanks
>
> Cyrus
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:12 ART