From: lalit gupta (lalit.tech@gmail.com)
Date: Sat Sep 15 2007 - 07:40:00 ART
HI Joseph,
thanks for helping me with this command l, i was looking for this command.
thanks and regards
lalit
On 9/14/07, Joseph Brunner <joe@affirmedsystems.com> wrote:
>
> Cisco3560SW2#sh spanning-tree int f0/2 det
> Port 4 (FastEthernet0/2) of VLAN0036 is forwarding
> Port path cost 19, Port priority 128, Port Identifier 128.4.
> Designated root has priority 24612, address 0009.7b64.9cc0
> Designated bridge has priority 32804, address 001a.2ffd.3500
> Designated port id is 128.4, designated path cost 1870
> Timers: message age 0, forward delay 0, hold 0
> Number of transitions to forwarding state: 1
> The port is in the portfast mode
> Link type is point-to-point by default
> Bpdu guard is enabled
> BPDU: sent 3173660, received 0
>
> It should be pretty clear from here...
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> lalit gupta
> Sent: Friday, September 14, 2007 11:20 AM
> To: Cisco certification
> Subject: bpdu guard
>
> HI Experts,
>
>
> Can somebody tel me how to check bpdu guard is enabled or not enabled on
> interface... I m not able to find any command related this
>
>
> thanks and regards
>
> lalit
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:12 ART