From: Robert Hosford (rhosford@winisp.net)
Date: Fri Sep 14 2007 - 20:51:24 ART
What is your CPU load?
-----Original Message-----
From: Joseph Brunner [mailto:joe@affirmedsystems.com]
Sent: Friday, September 14, 2007 7:41 PM
To: Robert Hosford; ccielab@groupstudy.com
Subject: RE: terminal server sluggishness
I'm telnetted into a 2620 router terminal server with async 8-port card, and
it reverse telnet's to 8 devices in my rack...
-Joe
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Robert Hosford
Sent: Friday, September 14, 2007 7:28 PM
To: Joseph Brunner; ccielab@groupstudy.com
Subject: RE: terminal server sluggishness
Sh proc cpu | ex 0.00%
I do this all day long. If you are SSHing into the box that is a real
killer.
What kind of routers do you have?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Joseph Brunner
Sent: Friday, September 14, 2007 7:09 PM
To: ccielab@groupstudy.com
Subject: terminal server sluggishness
Hello group,
My terminal server does not feel as fast to respond to the reverse telnets
as the IE rented racks, or of course, the real lab.
Could someone please let me know any hints to fix this. I feels REALLY slow
(much slower than a console into the device directly)
I have to run the routers/switches at 9600 baud on the console port, but
again, it doesn't even feel like regular console into the devices.
BTW: I'm telnetting to the terminal server directly on the same lan
Thank you,
-Joe
rack1ts#sh run | b line
privilege exec level 1 clear line
privilege exec level 1 clear
!
line con 0
line 33 40
session-timeout 60
exec-timeout 0 0
no flush-at-activation
absolute-timeout 60
terminal-type VT100
no exec
no history
no editing
transport preferred telnet
transport input all
transport output none
escape-character BREAK
telnet transparent
stopbits 1
flowcontrol hardware
line 41 48
session-timeout 60
no flush-at-activation
absolute-timeout 60
no history
no editing
transport preferred telnet
transport input all
escape-character BREAK
telnet transparent
stopbits 1
flowcontrol hardware
line aux 0
line vty 0 4
login local
line vty 5 15
login local
!
!
End
Show vers
rack1ts#sh vers
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS4-M), Version 12.3(23), RELEASE SOFTWARE
(fc5)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Tue 24-Jul-07 15:44 by stshen
Image text-base: 0x80008098, data-base: 0x8189FF54
ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
rack1ts uptime is 1 day, 22 hours, 19 minutes
System returned to ROM by error - a SegV exception, PC 0x8002B954
System image file is "flash:c2600-is4-mz.123-23.bin"
cisco 2620 (MPC860) processor (revision 0x600) with 61440K/4096K bytes of
memory.
Processor board ID JAD060303W4 (803112183)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
16 terminal line(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2142 (will be 0x2102 at next reload)
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:11 ART