From: Joseph Brunner (joe@affirmedsystems.com)
Date: Fri Sep 14 2007 - 13:24:06 ART
Cisco3560SW2#sh spanning-tree int f0/2 det
Port 4 (FastEthernet0/2) of VLAN0036 is forwarding
Port path cost 19, Port priority 128, Port Identifier 128.4.
Designated root has priority 24612, address 0009.7b64.9cc0
Designated bridge has priority 32804, address 001a.2ffd.3500
Designated port id is 128.4, designated path cost 1870
Timers: message age 0, forward delay 0, hold 0
Number of transitions to forwarding state: 1
The port is in the portfast mode
Link type is point-to-point by default
Bpdu guard is enabled
BPDU: sent 3173660, received 0
It should be pretty clear from here...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
lalit gupta
Sent: Friday, September 14, 2007 11:20 AM
To: Cisco certification
Subject: bpdu guard
HI Experts,
Can somebody tel me how to check bpdu guard is enabled or not enabled on
interface... I m not able to find any command related this
thanks and regards
lalit
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:11 ART