From: Joseph Brunner (joe@affirmedsystems.com)
Date: Wed Sep 12 2007 - 11:50:05 ART
Change the domain name on all switches and then change it back to what you
want.
I suspect you have a config revision number higher than your server.
Also make sure you enter the vtp domain name CAREFULLY.
-Joe
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Most
Zahan
Sent: Wednesday, September 12, 2007 10:20 AM
To: ccielab@groupstudy.com
Subject: Switching prblem
From: most.zahan@hotmail.comTo: ccielab@groupstudy.com;
ccielab-subscribe@groupstudy.com; cisco@groupstudy.comSubject: Date: Mon, 10
Sep 2007 22:52:17 -0300
Hi all, I am having problem with switching. like sw1-----sw2| ||
|| |SW3-----SW4 Now Sw1 should be Server and all others are
client.When conigured accordingly. Server VLAN was not propogating the VLAN
to
the client.There was trunk and etherchannel configured and channel was up
and
running.What could be the issue. Thx.most
Explore the seven wonders of the world Learn more!
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:11 ART