From: Edison Ortiz (edisonmortiz@gmail.com)
Date: Wed Sep 12 2007 - 08:57:38 ART
Update source-interface is missing from the config ....
Edison Ortiz
Routing and Switching, CCIE # 17943
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Marc
La Porte
Sent: Wednesday, September 12, 2007 7:35 AM
To: Ashok CCIE
Cc: ccielab@groupstudy.com
Subject: Re: BGP over Frame-relay
Ashok,
Can you also copy in your frame relay configuration?
Thanks
Marc
On 9/12/07, Ashok CCIE <ashok.ccie@gmail.com> wrote:
>
> Hi Team,
>
> I am configuring IBGP b/w loopback interfaces of two interfaces which
> are over Frame-relay. But my routers are not making any neighbor
relationship.
> Why so?
>
> Config is here..
>
> R1
>
> router bgp 100
> no synchronization
> bgp router-id 2.2.2.1
> bgp log-neighbor-changes
> network 1.1.1.0 mask 255.255.255.0
> network 2.2.2.1 mask 255.255.255.255
> neighbor 2.2.2.2 remote-as 100
> neighbor 2.2.2.2 next-hop-self
> neighbor 2.2.2.3 remote-as 100
> neighbor 2.2.2.3 next-hop-self
> no auto-summary
>
> R2
>
> router bgp 100
> no synchronization
> bgp router-id 2.2.2.2
> bgp log-neighbor-changes
> network 1.1.1.0 mask 255.255.255.0
> network 2.2.2.2 mask 255.255.255.255
> neighbor 2.2.2.1 remote-as 100
> neighbor 2.2.2.1 ebgp-multihop 255
> no auto-summary
>
>
> Could you please help?
>
> Thanks,
> Ashok
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:11 ART