From: Marc La Porte (marc.a.laporte@gmail.com)
Date: Mon Sep 10 2007 - 18:36:16 ART
Oops typo... should be:
router ospf 1
redistribute rip metric 400 subnets route-map RIP->OSPF
!
route-map RIP->OSPF permit 10
set metric 400
On 9/10/07, WorkerBee <ciscobee@gmail.com> wrote:
>
> The first redistribution method explicitly specify "RIP" to be
> redistributed.
>
> The second redistribution method is "ERROR" or typo?
>
> Should be this instead
>
> router ospf 1
> redistribute subnets route-map RIP->OSPF
>
> R6(config-router)#redistribute subnets route-map RIP->OSPF
> Unknown routing protocol - "redistribute subnets route-map RIP->OSPF"
>
> To specify the subnet optional keyword, you need to specify also the
> routing protocol. I don't see such option "redistribution ip
> subnets...." in CCO.
>
>
>
>
>
>
> On 9/11/07, Marc La Porte <marc.a.laporte@gmail.com> wrote:
> > Guys,
> >
> > What's the difference between:
> >
> > router ospf 1
> > redistribute rip metric 400 subnets
> >
> > or
> >
> > router ospf 1
> > redistribute ip subnets route-map RIP->OSPF
> > !
> > route-map RIP->OSPF permit 10
> > set metric 400
> >
> > (or than having more options for granularity later on, if needed)
> >
> > Thanks
> > Marc
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:10 ART