From: Salau, Yemi (yemi.salau@siemens.com)
Date: Mon Sep 10 2007 - 10:52:27 ART
Assuming the requirement is exactly worded as you highlighted, then it
states that switches will not "attempt(actively)" to "automatically
trunk" using DTP ... So in other words they can passively trunk using
DTP! So, the requirement didn't actually specified not to use DTP, i.e..
Didn't tell not to automatically trunk(that will mean disable DTP); but
the key phrase here is "will not attempt"
Although, I must admit it's very tempting to use "swi nonegotiate" to
disable automatic trunking using DTP, but there you go ... Another of
those gotchas! But there is another piece to the puzzle ... There must
be some links on the other side configured with "swi mo dyna desir" or
"swi mo trunk" for these switches to interoperate, because as you know
"dynamic auto" will not peer with another "dynamic auto"
Many Thanks
Yemi Salau
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ISolveSystems
Sent: Monday, September 10, 2007 2:27 PM
To: Cisco certification
Subject: Question intepretation - Trunking
Ensure that the links between SW1, SW2, SW3, SW4 will not attempt to
automatically trunk using DTP.
My answer is
swi tru en dot
swi mo tru
swi nonegotiate
However, the solution from the vendor is "swi mo dy auto".
What would be your answer?
Thanks.
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:10 ART