From: Emil Patel (emilpatel@hotmail.com)
Date: Sat Sep 08 2007 - 21:55:34 ART
The frame-relay map on R1:
R1#>sh frame mapSerial0/0.1 (up): ip 172.16.123.2 dlci 102(0x66,0x1860),
static, broadcast, CISCO, status defined, active
R2#>sh frame map
Serial0/0 (up): ip 172.16.123.1 dlci 201(0xC9,0x3090), static,
broadcast, CISCO, status defined, active
Interface status on R1 and R2
Serial0/0 is up, line protocol is up Hardware is PowerQUICC Serial MTU 1500
bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255,
rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10
sec) LMI enq sent 1497, LMI stat recvd 1498, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is
CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue
0/64, broadcasts sent/dropped 0/0, interface broadcasts 0 Last input
00:00:06, output 00:00:06, output hang never Last clearing of "show
interface" counters 04:10:03 Input queue: 0/75/0/0 (size/max/drops/flushes);
Total output drops: 0 Queueing strategy: weighted fair Output queue:
0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256
(active/max active/max total) Reserved Conversations 0/0 (allocated/max
allocated) Available Bandwidth 1158 kilobits/sec 5 minute input rate 0
bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec
1747 packets input, 38100 bytes, 0 no buffer Received 0 broadcasts, 0
runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0
ignored, 0 abort 1500 packets output, 19501 bytes, 0 underruns 0
output errors, 0 collisions, 1 interface resets 0 output buffer failures,
0 output buffers swapped out 2 carrier transitions DCD=up DSR=up
DTR=up RTS=up CTS=up
R1#> sh int s0/0.1Serial0/0.1 is up, line protocol is up Hardware is
PowerQUICC Serial Internet address is 172.16.123.1/24 MTU 1500 bytes, BW
1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload
1/255 Encapsulation FRAME-RELAY
Router2>sh int s0/0Serial0/0 is up, line protocol is up Hardware is
PowerQUICC Serial Internet address is 172.16.123.2/24 MTU 1500 bytes, BW
1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload
1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec)
LMI enq sent 1483, LMI stat recvd 1485, LMI upd recvd 0, DTE LMI up LMI enq
recvd 0, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO
frame relay DTE Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface
broadcasts 0 Last input 00:00:04, output 00:00:04, output hang never Last
clearing of "show interface" counters 04:09:15 Input queue: 0/75/0/0
(size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo
Output queue :0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec 1731 packets input, 37669
bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
2 input errors, 0 CRC, 2 frame, 0 overrun, 0 ignored, 0 abort 1489 packets
output, 19359 bytes, 0 underruns 0 output errors, 0 collisions, 2
interface resets 0 output buffer failures, 0 output buffers swapped out
2 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up
Debug output on R1 and R2
R1#> deb frame packet
Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 172.16.123.2,
timeout is 2 seconds:
04:12:01: Serial0/0.1: broadcast search04:12:01: Serial0/0.1:encaps failed on
broadcast for link 38(BRIDGE)04:12:01: Serial0/0.1: broadcast search04:12:01:
Serial0/0.1:encaps failed on broadcast for link 38(BRIDGE)04:12:02:
Serial0/0.1: broadcast search04:12:02: Serial0/0.1:encaps failed on broadcast
for link 38(BRIDGE)04:12:02: Serial0/0.1: broadcast search04:12:02:
Serial0/0.1:encaps failed on broadcast for link 38(BRIDGE)04:12:03:
Serial0/0.1: broadcast search04:12:03: Serial0/0.1:encaps failed on broadcast
for link 38(BRIDGE)
I am really puzzled... I have wasted close to 4 days trying to figure out the
issue without any luck. Any help is appreciated.
Emil Patel MD Anderson Cancer Center - Diagnostic Imaging Making Cancer
History!
epatel@mdanderson.org
emilpatel@hotmail.com
> From: emilpatel@hotmail.com> To: ccielab@groupstudy.com;
nobody@groupstudy.com> Subject: FrameRelay Cloud> Date: Sun, 9 Sep 2007
00:39:46 +0000> > I am setting up a lab and have question about FrameRelay
Cloud.> > R1>- FR>- R2> > R1 Config is:> > in s 0/0> encap frame relay> > int
s0/0.1 multipoint> ip adress 172.16.123.1 255.255.255.0> no frame inv-arp>
frame-relay map ip 172.16.123.2 102 broadcast> > R2 config is:> > int s0/0> ip
adress 172.16.123.2 255.255.255.0> no frame inv-arp> frame-relay map ip
172.16.123.1 201 broadcast> > and framerelay Switch Config is:> > frame-relay
switching> > interface Serial0 description Connected to Rack1R1 no ip address
encapsulation> frame-relay no ip route-cache no ip mroute-cache clockrate
2000000 no> fair-queue frame-relay intf-type dce frame-relay route 102
interface Serial1> 201 frame-relay route 103 interface Serial2 301 frame-relay
route 104> interface Serial4 401 frame-relay route 105 interface Serial5 501
frame-relay> route 113 interface Serial3 311!interface Serial1 description
Connected to> Rack1R2 no ip address encapsulation frame-relay no ip
route-cache no ip> mroute-cache clockrate 2000000 frame-relay intf-type dce
frame-relay route 201> interface Serial0 102 frame-relay route 203 interface
Serial2 302 frame-relay> route 204 interface Serial4 402 frame-relay route 205
interface Serial5 502> frame-relay route 213 interface Serial3 312!interface
Serial2 description> Connected to Rack1R3 no ip address encapsulation
frame-relay no ip route-cache> no ip mroute-cache clockrate 64000 frame-relay
intf-type dce frame-relay route> 301 interface Serial0 103 frame-relay route
302 interface Serial1 203> frame-relay route 304 interface Serial4 403
frame-relay route 305 interface> Serial5 503> > > I am unable to ping R2 from
R1 and viceversa. I did debug frame packet and> seeing encapsulation failed
message. But the I have defined the mappings so I> am really confused what is
causing this behavior.> > Any feedback will be appreiciated.Emil Patel MD
Anderson Cancer Center -> Diagnostic Imaging Making Cancer History!> >
epatel@mdanderson.org> emilpatel@hotmail.com> >
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:10 ART