From: Mohamed M Moustafa (mmma@gawab.com)
Date: Sat Sep 08 2007 - 13:13:25 ART
Hi All,
The only case where a standby router having preempt disabled, is able to
take the active role, is when the active router fails, and seizes to send
Hello packets.
HTH,
Mohammed Mahmoud.
mohammed shoeb ahmed <mdshoeb@gmail.com> wrote on 8 Sep 2007, 05:33 PM:
Subject: Re: HSRP Preempt
>Dear Joe,
>
>Preempt is required on standby router as well, As you tested if primary
>router falls below the priority of the standby router the failover will not
>happen unless any of the router reboots.
>
>If the failover to happen whitout reboot then both Primary and Standby both
>should be configured with preemption.
>
>HTH
>
>
>--
>Best Regards,
>
>Mohammed Shoeb Ahmed
>
>Sr. Consultant,
>CCIE 18379
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
---------------------------------------------
Free POP3 Email from www.Gawab.com
Sign up NOW and get your account @gawab.com!!
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:10 ART