From: Charles McGeoch \(Europe\) (charles.mcgeoch@uk.didata.com)
Date: Thu Sep 06 2007 - 05:37:34 ART
Hi Martin,
My 2610s are running 12.3(20) Enterprise Basic, they have 64Mb of DRAM
and 16Mb of Flash. The IOS filename is c2600-j1s3-mz.123-20.bin and
runs both on XM and non XM 2600s.
With this IOS running I can do the following commands on either a 2610
or a 2610XM:
!
mpls label protocol ldp
!
interface Serial1/0
tag-switching ip
!
Regards
Chaz
-----Original Message-----
From: Martin Kiefer [mailto:martin@kiefer.dk]
Sent: 05 September 2007 22:17
To: Charles McGeoch (Europe); 'istong'; 'Brian Dennis'; 'ccie2007';
ccielab@groupstudy.com
Subject: RE: 2610XM and MPLS
Wich version and memory/ram do you have on those routers?
/Martin
> -----Original Message-----
> From: Charles McGeoch (Europe) [mailto:charles.mcgeoch@uk.didata.com]
> Sent: Wednesday, September 05, 2007 4:49 PM
> To: Martin Kiefer; istong; Brian Dennis; ccie2007;
> ccielab@groupstudy.com
> Subject: RE: 2610XM and MPLS
>
> I have MPLS working fine on several 2610 routers, both XM and non XM.
>
> Regards
> Chaz
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Martin Kiefer
> Sent: 30 August 2007 21:50
> To: 'istong'; 'Brian Dennis'; 'ccie2007'; ccielab@groupstudy.com
> Subject: RE: 2610XM and MPLS
>
> Please have in mind that the 2650-51XM is a different CPU than the
> 2610-11XM. So the binary file is different and won't work on the
> 2610-21XM.
>
> HTH
> Martin
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > istong
> > Sent: Saturday, August 25, 2007 1:16 AM
> > To: 'Brian Dennis'; 'ccie2007'; ccielab@groupstudy.com
> > Subject: RE: 2610XM and MPLS
> >
> > A 2650XM router does have some support for it using 12.3(8)T11. I
> > wonder
> > what would happen if you loaded that IOS on a 2600XM with 128/32 or
> > even
> > 256/48 flash/mem??????
> >
> > As a side the 3640 routers are low priced and do have some MPLS
> > support.
> >
> >
> > Thanks,
> >
> > Ian
> > www.ccie4u.com
> >
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Brian Dennis
> > Sent: Thursday, August 23, 2007 5:56 PM
> > To: ccie2007; ccielab@groupstudy.com
> > Subject: Re: 2610XM and MPLS
> >
> > You can use the feature navigator to see what is or isn't supported
> for
> > your IOS and platform.
> >
> > http://www.cisco.com/go/fn/
> >
> > I can tell you from personal experience that MPLS is not support on
> the
> > 2610XMs :-(
> >
> > Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
> > bdennis@internetworkexpert.com
> >
> > Internetwork Expert, Inc.
> > http://www.InternetworkExpert.com
> > Toll Free: 877-224-8987
> > Direct: 775-745-6404 (Outside the US and Canada)
> >
> >
> > >----- Original Message -----
> > Subject: 2610XM and MPLS
> > Date: Thu, August 23, 2007 12:36
> > From: "ccie2007" <ccie2007@cableonda.net>
> >
> > > Dear all,
> > > I am runnin flash:c2600-adventerprisek9-mz.123-11.T11.bin
> > > on a 2610XM. I would think that this router (with this IOS)
> > > supports MPLS but it seems that it doesn't.
> > >
> > > R5(config-if)#mp ?
> > > % Unrecognized command
> > > R5(config-if)#tag-?
> > > % Unrecognized command
> > >
> > > I can't find anythin on the cisco site that says that
> > > 2610XM does not support MPLS.
> > > can anybody confirm if this is true or I have to change the
> > > software.
> > >
> > >
> > > thanks in advanced.
> > >
> > > Luis
> > >
> > >
> >
>
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:09 ART