From: ccie1101 (ccie1101@gmail.com)
Date: Wed Sep 05 2007 - 07:09:33 ART
Mohammed ,
So you are saying that if you do not specify the port number, it will know
it is rip ???
*That a host with an IP address of **192.10.1.2* <http://10.20.30.40/>*54 is
to send rip updates to all host on its ethernet segment. *
My answer :-
access-list 100 permit udp host 192.10.1.254 eq rip any
The solution given is
access-list 100 permit udp host 192.10.1.254 any eq rip
This would mean that we could write the acl as follows and rip information
will be passed from 192.10.1.254 to other host running rip on the segment ?
access-list 100 permit udp host 192.10.1.254 any
Is this what you are saying ?
ccie1101.
On 9/5/07, Mohamed M Moustafa <mmma@gawab.com> wrote:
>
> Hi,
>
> Both should work as RIP (unlike BGP) uses UDP port 520 as both the source
> and the destination.
>
> BR,
> Mohammed Mahmoud.
>
>
> ccie1101 <ccie1101@gmail.com> wrote on 5 Sep 2007, 12:36 PM:
> Subject: Re : Basic ACL Q ....
> > Hi,
> > I have a basic question on ACL .... The question says :-
> >*That a host with an IP address of 192.10.1.2 <http://10.20.30.40/>54 is
> to
> >send rip updates to all host on its ethernet segment.*
> >
> > The way that I constructed the ACL is as follows :-
> >
> >access-list 100 permit udp host 192.10.1.254 eq rip any
> >access-list 100 deny ip any any
> >
> > The solution given was '*host 192.10.1.254 any eq rip*' .....
> >
> >Pls enlighten,
> >**
> >Thank you,
> >
> >ccie1101.
> >
> >_______________________________________________________________________
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
> >
>
> ---------------------------------------------
> Free POP3 Email from www.Gawab.com
> Sign up NOW and get your account @gawab.com!!
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:09 ART