From: Edward (edwlui@gmail.com)
Date: Fri Aug 31 2007 - 19:03:17 ART
Anjum,
You put the wrong DLCI on Router A
router A
interface Serial0/0/0.1 point-to-point
ip address x.y.z.6 255.255.255.0
frame-relay interface-dlci 10 <<<<<<<<<<< HERE
Edward Lui
On 8/31/07, Muhammad Nadeem Anjum <nad@qasim-ent.com> wrote:
>
> I am facing this problem on both ends. Can some one explain why staus
> deleted
>
>
>
> Router A
>
> Serial0/0/0.1 (down): point-to-point dlci, dlci 100(0x64,0x1840),
> broadcast
>
> status deleted
>
> Router B
>
> Serial0/0.100 (down): point-to-point dlci, dlci 100(0x64,0x1840),
> broadcast
>
> status deleted
> router A
>
> interface Serial0/0/0
>
> no ip address
>
> encapsulation frame-relay
>
> frame-relay lmi-type cisco
>
> !
>
> interface Serial0/0/0.1 point-to-point
>
> ip address x.y.z.6 255.255.255.0
>
> frame-relay interface-dlci 10
>
>
>
> router B
>
> interface Serial0/0
>
> no ip address
>
> encapsulation frame-relay
>
> serial restart-delay 0
>
> frame-relay lmi-type cisco
>
> !
>
>
>
> interface Serial0/0.100 point-to-point
>
> ip address x.y.z.7 255.255.255.0
>
> frame-relay interface-dlci 100
>
>
>
>
> Thanks
> Anjum
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:14 ART