From: nicky noname (cisco2study@gmail.com)
Date: Wed Aug 29 2007 - 11:59:42 ART
Hi,
I am loosing it a bit.....with rmon that is. I thought I had this well
understood......but I just completed a mock lab and the IOS would not allow
me to enter in rmon events with descriptions that had spaces in between the
words. The exact lines are below.
Can someone please set me straight on this...I'm sure it very simple. I had
to use an underscore between the words...am sure there are no marks here!
This is what I tried
mon event 1 log description "One Minute CPU Average Rising Above 80%" owner
config
rmon event 2 log description "One Minute CPU Average Back Below 40%" owner
config
rmon alarm 1 lsystem.57.0 15 absolute rising-threshold 80 1
falling-threshold 40 2 owner config
........But this is all that the IOS would accept .......
rmon event 1 log description One_Minute_CPU_Average_Rising_Above_80% owner
config
rmon event 2 log description One_Minute_CPU_Average_Back_Below_40% owner
config
rmon alarm 1 lsystem.57.0 15 absolute rising-threshold 80 1
falling-threshold 40 2 owner config
Also....I think I have the solution wrong in how i specified the
percentages. They should be 80% and 40%, as u can see above........but the
alarm doesn't indicate a percentage input?
Thanks again
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:13 ART