From: Curt Gregg \(cugregg\) (cugregg@cisco.com)
Date: Sat Aug 25 2007 - 19:45:35 ART
Load Splitting IP Multicast Traffic
http://www.cisco.com/en/US/partner/products/ps6350/products_configuratio
n_guide_chapter09186a00805a595a.html#wp1064193
Curt
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
NITIN NITIN
Sent: Saturday, August 25, 2007 10:14 AM
To: ccielab@groupstudy.com
Subject: RPF FAILURE
Hi Experts ,
I have a question poped in my mind while doing labs --- please advise
E0/0(RECIEVER for 225.5.5.5)
|
|
R5 Se2/0.1______Se2/0 R1 Se2/1_______Se2/1R3---(TRANSMITTER 225.5.5.5)
| |
S2/0.2 Se2/3
| |
|______________Se2/0 R2 Se2/1___________|
Sorry about rough dig,,,,
EXPLANATION DIAG----
R5 connects to R1 via FR S2/0.1
R5 coonets to R2 via FR S2/0.2
R1 and R2 connect to R3 via serial
EXPLANATION MULTICAT CONFIGURATION ----
MULTICAST RECIEVER on ETHER OF R5
and transmitter behind R3 .
MULTICAST DENSE MODE CONFIGURED ON
R5 Se2/0.2
R2 Se2/0 and Se2/1
R3 Se2/3
A tunnel configured b/w R5 and R3 over link Se2/0.1
on R5
--- and dense mode configured on it
QUESTION ------ ?
I have put mroute 0.0.0.0 255.255.255.255 to tunnel
BUT I want
To load balance traffic b/w TUNNEL and Se2/0.2
HOW TO ACHIVE THIS LOAD BALANCING
when I put this default mroute via tunnel then RPF failure occur on
serial2/0.2 ???
Plese let me know if configs required..............
---------------------------------
Be a better Heartthrob. Get better relationship answers from someone who
knows.
Yahoo! Answers - Check it out.
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:13 ART