From: Joseph Brunner (joe@affirmedsystems.com)
Date: Fri Aug 24 2007 - 03:49:11 ART
It's 2007, I used L3 routed links...
Why do we ever need end to end vlans? Local vlan's only for me...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Toh
Soon, Lim
Sent: Friday, August 24, 2007 2:30 AM
To: sheherezada@gmail.com
Cc: Ajay Prakash; slevin kremera; Cisco certification
Subject: Re: vlan dot1q tag native
Hi All,
Thanks for sharing.
I used to think that we can easily VLAN-hop across 802.1Q trunk by
configuring different native VLAN at both ends. Having labbed it, I realize
STP actually blocks off those inconsistent VLANs.
In real-world, I typically set the native VLANs to a bogus non-routable VLAN
and prune it ("switchport trunk allowed vlan remove...") from the trunk.
What's your practice?
Thank you.
B.Rgds,
Lim TS
On 8/24/07, sheherezada@gmail.com <sheherezada@gmail.com> wrote:
>
> Yes, you use that when you do dot1q in dot1q (that's it, double
> tagging), so that traffic in the native VLAN can be tunneled
> correctly.
>
> HTH,
>
> Mihai Dumitru
> CCIE #16616 (SP, R&S)
>
> On 8/24/07, Toh Soon, Lim <tohsoon28@gmail.com> wrote:
> > Hi All,
> >
> > On the other way around, received untagged frames are considered to
> belong
> > to the native VLAN.
> >
> > Does anyone know the practicality of the "vlan dot1q tag native" command
> in
> > the real-world?
> >
> >
> > Thank you.
> >
> > B.Rgds,
> > Lim TS
> >
> >
> > On 8/24/07, Ajay Prakash <ajay.prakash@networkpeople.co.in> wrote:
> > >
> > > In 802.1q encapsulation, there is a native VLAN (Default VLAN 1). The
> > > frames
> > > destined for native VLAN are not tagged by the switch. If you issue
> this
> > > command then all frames including frames for the native VLAN will have
> a
> > > 812.1q header appended.
> > >
> > > Ajay
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > > slevin kremera
> > > Sent: Friday, August 24, 2007 6:49 AM
> > > To: Cisco certification
> > > Subject: vlan dot1q tag native
> > >
> > > whats the use of this command ,what does it accomplish
> > >
> > >
> _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:13 ART