From: sheherezada@gmail.com
Date: Fri Aug 24 2007 - 02:41:35 ART
Yes, you use that when you do dot1q in dot1q (that's it, double
tagging), so that traffic in the native VLAN can be tunneled
correctly.
HTH,
Mihai Dumitru
CCIE #16616 (SP, R&S)
On 8/24/07, Toh Soon, Lim <tohsoon28@gmail.com> wrote:
> Hi All,
>
> On the other way around, received untagged frames are considered to belong
> to the native VLAN.
>
> Does anyone know the practicality of the "vlan dot1q tag native" command in
> the real-world?
>
>
> Thank you.
>
> B.Rgds,
> Lim TS
>
>
> On 8/24/07, Ajay Prakash <ajay.prakash@networkpeople.co.in> wrote:
> >
> > In 802.1q encapsulation, there is a native VLAN (Default VLAN 1). The
> > frames
> > destined for native VLAN are not tagged by the switch. If you issue this
> > command then all frames including frames for the native VLAN will have a
> > 812.1q header appended.
> >
> > Ajay
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > slevin kremera
> > Sent: Friday, August 24, 2007 6:49 AM
> > To: Cisco certification
> > Subject: vlan dot1q tag native
> >
> > whats the use of this command ,what does it accomplish
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:13 ART