From: Mounir Mohamed (mounir.mohamed@gmail.com)
Date: Thu Aug 23 2007 - 21:01:40 ART
HI Gabriel,
It's not VPN-MPLS terminology ONLY,PE and P is a terminology for any MPLS
implementations, So why did u reserve it for only one application
(MPLS-VPN) actually if am providing MPLS-ATOM i will call my gears PE and P
as soon as they imposing and deposing labels. so the Guy (Mohamed) was
talking about MPLS benefits so it's clear that he meaning MPLS applications.
Best Regards,
Mounir Mohamed
On 8/23/07, Gabriel Nunes <gabriel.nunes@gmail.com> wrote:
>
> Hi Mohamed,
>
> P and PE belongs to VPN MPLS terminology. If you have an ISP backbone
> where
> you don't have MP-BGP running, you don't have P and PE routers. In this
> case
> you would have an MPLS core backbone only with probaly a Traffic
> Engineering...
>
> Gabriel Nunes
> CCIE#17737
>
>
> On 8/23/07, Mohamed M Moustafa <mmma@gawab.com> wrote:
> >
> > Hi,
> >
> > As Brian has stated, only the core routers (P routers) are not running
> BGP
> > as they only do label switching but the edge routers (PE routers) still
> > need to run BGP, this is always the case of an MPLS backbone providers,
> > but
> > all the routers needs to run IGP (most commonly ISIS or OSPF), before
> even
> > MPLS can operate, and the first benefit of MPLS is that the core routers
> > needs not a full internet routing table as they just do label switching,
> > and then comes all the advanced features of MPLS.
> >
> > HTH,
> > Mohammed Mahmoud.
> >
> >
> > C SAMARTH <samarth_04@hotmail.com> wrote on 23 Aug 2007, 08:08 PM:
> > Subject: RE: Question for you ISP guys
> > >Has any of the ISP's completely stopped running any BGP in their core
> and
> > >running only MPLS + IGP there?
> > >
> > >Best Wishes,
> > >SAMARTH
> > >CCIE #18535
> > >
> > >> From: bmcgahan@internetworkexpert.com> To: ggombas@gmail.com;
> > >ccielab@groupstudy.com> Subject: RE: Question for you ISP guys> Date:
> > Thu,
> > >23
> > >Aug 2007 11:34:39 -0500> > A lot of large providers run IS-IS as their
> > IGP,
> > >BGP at the edge,> and then MPLS in the core. Running MPLS not only
> > enables
> > >advanced services> like traffic engineering and L2/L3 VPNs, it also
> > removes
> > >the requirement of> transit devices having to carry the full public BGP
> > >table.
> > >It works this> way because the MPLS enabled routers don't need to know
> > what
> > >the final> destination of a packet is, only what the exit point is.> >
> > >HTH,> >
> > >Brian McGahan, CCIE #8593 (R&S/SP/Security)>
> > >bmcgahan@internetworkexpert.com >
> > >> Internetwork Expert, Inc.> http://www.InternetworkExpert.com> Toll
> > Free:
> > >877-224-8987 x 705> Outside US: 775-826-4344 x 705> 24/7 Support:
> > >http://forum.internetworkexpert.com> Live Chat:
> > >http://www.internetworkexpert.com/chat/> > > > -----Original
> > Message----->
> > >>
> > >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of>
> > >
> > >Gregory Gombas> > Sent: Thursday, August 23, 2007 10:37 AM> > To: Cisco
> > >certification> > Subject: Question for you ISP guys> > > > For those of
> > you
> > >with ISP experience, can you tell me what routing> > protocols do
> service
> > >providers typicall run within their AS?> > > > Do you have every single
> > >router
> > >running BGP? I can't imagine> > redistributing 225k+> > routes into an
> > IGP,
> > >so
> > >how do you pass these routes withing your AS?> > > > If you are using
> > iBGP
> > >what are you using to transmit next hop> > information (as iBGP does
> not
> > >normally update the next hop of the> > external AS)?> > > > Can someone
> > >point
> > >me to some documentation showing typical ISP routing> > design?> > > >
> > >Thanks,> > Greg> > > >
> >
> >_______________________________________________________________________>
> > >
> > >Subscription information may be found at:> >
> > >http://www.groupstudy.com/list/CCIELab.html> >
> >
> >_______________________________________________________________________>
> > >Subscription information may be found at: >
> > >http://www.groupstudy.com/list/CCIELab.html
> > >
> > >_______________________________________________________________________
> > >Subscription information may be found at:
> > >http://www.groupstudy.com/list/CCIELab.html
> > >
> >
> > ---------------------------------------------
> > Free POP3 Email from www.Gawab.com
> > Sign up NOW and get your account @gawab.com!!
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Best Reagrds, Mounir Mohamed
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:12 ART