From: Wes Stevens (wrsteve33-gsccie@yahoo.com)
Date: Tue Aug 21 2007 - 19:07:02 ART
It is not supported on sip/spa's along with a lot of other things:(
Just say priority and then rate limit it.
----- Original Message ----
From: mam phuquoc <mamphuquoc@gmail.com>
To: Cisco certification <ccielab@groupstudy.com>
Sent: Friday, August 17, 2007 3:18:18 PM
Subject: SIP/SPA bug ???
on a 6506 with SIP and SPA on slot 1, when I configure hiearchical QOS and
apply it to the SPA port gig1/0/0, and cannot use the priority command. Is
anyone able to do this?
policy-map core-egress
class VoIP_RTP
bandwidth 100000
class Video_Payload
bandwidth 50000
policy-map sonet-shape
class class-default
shape average 300000000
service-policy core-egress
Router(config)#policy-map egress
Router(config-pmap)# class VoIP_RTP
Router(config-pmap-c)#no bandwidth 100000
Router(config-pmap-c)#priority percent 30
*priority percent command is not supported in output direction for this
interface
Configuration failed on:
GigabitEthernet1/0/0*
IOS (tm) s3223_rp Software (s3223_rp-ADVIPSERVICESK9_WAN-M), Version 12.2
(18)SXF
10, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Fri 13-Jul-07 03:58 by kellythw
Image text-base: 0x40101040, data-base: 0x42D4DFC0
ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)
BOOTLDR: s3223_rp Software (s3223_rp-ADVIPSERVICESK9_WAN-M), Version 12.2
(18)SXF
10, RELEASE SOFTWARE (fc1)
cat65-xmc-a uptime is 3 hours, 16 minutes
Time since cat65-xmc-a switched to active is 3 hours, 15 minutes
System returned to ROM by s/w reset (SP by power-on)
System image file is "sup-bootdisk:s3223-advipservicesk9_wan-
mz.122-18.SXF10.bin
"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found
at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco WS-C6506-E (R7000) processor (revision 1.1) with 458752K/65536K bytes
of m
emory.
Processor board ID SAL1121PR8U
R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3 Cache
Last reset from power-on
SuperLAT software (copyright 1990 by Meridian Technology Corp).
X.25 software, Version 3.0.0.
Bridging software.
TN3270 Emulation software.
1 SIP-400 controller (2 GigabitEthernet).
1 Virtual Ethernet/IEEE 802.3 interface
11 Gigabit Ethernet/IEEE 802.3 interfaces
1915K bytes of non-volatile configuration memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:12 ART