From: Bajo (bajoalex@gmail.com)
Date: Tue Aug 21 2007 - 14:32:39 ART
When you run MST, the whole switch is run in mst mode. If you do not
explicitly assign a vlan to any mst instance, it will default to zero.
Am not sure if you can avoid that:.
Hopefully someone else will shade light on this.......
Rack1SW1#sh spanning-tree ms configuration
Name [IESTP]
Revision 10 Instances configured 4
Instance Vlans mapped
-------- ---------------------------------------------------------------------
0 2-4,6-11,13-26,28-33,35-45,47-57,59-88,90-106,108-362,364-4094
1 1,5,12,107
2 27,34,58
3 46,89,363
-------------------------------------------------------------------------------
Rack1SW1(config)#spanning-tree mode ?
mst Multiple spanning tree mode
pvst Per-Vlan spanning tree mode
rapid-pvst Per-Vlan rapid spanning tree mode
On 8/21/07, Muhabat <muhabat@gmail.com> wrote:
> Hi GS,
>
> I have one small question, how to remove a single Vlan from MSTP, so that no
> STP/MSTP instance run on that vlan.
>
>
>
> Any reply will be appreciated and thanks in advance,
>
>
>
>
>
> Best Regards,
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Kind Regards,Bajo
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:12 ART