From: Scott Vermillion (scott_ccie_list@it-ag.com)
Date: Sun Aug 19 2007 - 15:37:19 ART
And here I thought it was just me!? Wasted some time with this a few
months back while a semi-production network was hurting. Anyone have any
success w/ this 'archive' business?
-------- Original Message --------
Subject: RE: 3560 S to E upgrade
From: "Joseph Brunner" <joe@affirmedsystems.com>
Date: Sat, August 18, 2007 8:03 pm
To: "'Toh Soon, Lim'" <tohsoon28@gmail.com>
Cc: "'Antonio Soares'" <amsoares@netcabo.pt>, "'Bob Nelson'"
<nelsnjr@cox.net>, <ccielab@groupstudy.com>
With the 3560 and the 3750 the best I do it is to format, and start
fresh.
That command is a waste of time
_____
From: Toh Soon, Lim [mailto:tohsoon28@gmail.com]
Sent: Saturday, August 18, 2007 11:00 PM
To: Joseph Brunner
Cc: Antonio Soares; Bob Nelson; ccielab@groupstudy.com
Subject: Re: 3560 S to E upgrade
Hi Joseph,
Great, thanks for your advice.
I previously used the "archive download-sw /overwrite /reload
tftp://..."
method to dump in the .tar file and the upgrade failed.
I will try to tftp in the .bin file instead.
Thank you.
B.Rgds,
Lim TS
On 8/19/07, Joseph Brunner <joe@affirmedsystems.com> wrote:
Just get the code, format the flash, and tftp it in.
Its basic...
Don't worry about the licenses...
There is only CCIE certified and not CCIE certified.
Nothing else matters
-----Original Message-----
From: nobody@groupstudy.com [mailto: nobody@groupstudy.com
<mailto:nobody@groupstudy.com> ] On Behalf Of Toh
Soon, Lim
Sent: Saturday, August 18, 2007 10:40 PM
To: Antonio Soares
Cc: Bob Nelson; ccielab@groupstudy.com
Subject: Re: 3560 S to E upgrade
Hi Antonio,
Can you really upgrade the SMI to EMI without purchasing the upgrade
kit?
I remember I tried to upgrade a C3560G-48PS-S (with IP BASE) to IP
SERVICES
in order to support OSPF. The upgrade failed.
This said, are we unable to upgrade all SMI models to EMI without the
upgrade kit? I have a few C3560 SMI models which I want to upgrade to
EMI
for my lab practical.
Please advise.
Thank you.
B.Rgds,
Lim TS
On 8/15/07, Antonio Soares <amsoares@netcabo.pt> wrote:
>
> AFAIK, there's no support contract that gives you Feature Set
Upgrades.
> Check here the SmartNet details:
>
>
>
http://www.cisco.com/application/pdf/en/us/guest/products/ps2978/c1592/cdcco
> nt_0900aecd8042b4d6.pdf
>
> You can do the SMI-to-EMI upgrade but it will be unlicensed. You
will need
> to purchase the upgrade kit:
>
> CD-3560-EMI= Enhanced Multilayer Image upgrade for 3560 10/100
models
>
>
> Regards,
>
> Antonio Soares
> CCIE #18473, CCNP, CCIP
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto: nobody@groupstudy.com] On
Behalf Of
> Bob
> Nelson
> Sent: terga-feira, 14 de Agosto de 2007 6:58
> To: ccielab@groupstudy.com <mailto:ccielab@groupstudy.com>
> Subject: 3560 S to E upgrade
>
> I researched this but it appears you have to purchase a license for
the E
> version. The device is under SmartNet, but I am not sure this is
covered.
> Is it just as simple as downloading the E version of software and
> replacing
> the S version, or is there some license key that is required to
enable the
> E
> version prior or after installation? To purchase the upgrade key
appears
> to
> cost almost as much as the switch, seem a little ridiculous since I
have
> SmartNet.
>
> If this is the case, what good does SmartNet do on the device?
>
> Any ideas or additional info would help.
>
> TIA
>
> B
>
>
_______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
_______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:12 ART