From: NITIN NITIN (ccie_study_123@yahoo.com)
Date: Sun Aug 19 2007 - 02:32:52 ART
Thanks Joseph ,
but if "USE
THE MINIMUM NUMBER OF VLANS ON EACH VTP DOMAIN" is NOT mentioned per the Question sections --- can we use the practice I mentioned below....
Regards
Joseph Brunner <joe@affirmedsystems.com> wrote:
Bad practice, bad idea...
Many labs want discretion in creating vlans, that's part of the the
challenge... get used to these words...
READ EACH SECTION FULLY BEFORE CONFIGURING ANYTHING IN THAT SECTION
If task 1.1 says create 2 vtp domains and I read ahead and see 1.3 said "USE
THE MINIMUM NUMBER OF VLANS ON EACH VTP DOMAIN" I would create the vtp
domains before I do anything and make sure any vlans have not been
learned...
If you have more than 1 vtp domain, you can probably expect to have
different vlans used in each... here is a caveat!
Draw your layer 2 diagram, complete with trunks and router's on a stick,
etc. You may need to create a vlan in a domain just to carry traffic between
a router on a stick and the other vtp domain etc.
-Joe
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
NITIN NITIN
Sent: Saturday, August 18, 2007 3:53 AM
To: ccielab@groupstudy.com
Subject: VLAN
Hi Experts,
If Q says configure SW1 and SW2 in VTP DOMAIN A
and
configure SW3 and SW4 in VTP DOMAIN B
Is it a good practice to make all switches in a COMMON DOMAIN ( SAY VTP
DOMAIN CCIE) CREATE VLANS and let it propogate to ALL SWITCHES over TRUNK
......and then change DOMAIN name as per QUESTION.............
In this will the expectation of Q be to have diff vlan in each domain or
just keep domain name diff and database of vlans sync........
---------------------------------
Ready for the edge of your seat? Check out tonight's top picks on Yahoo! TV.
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:12 ART