From: Toh Soon, Lim (tohsoon28@gmail.com)
Date: Sun Aug 19 2007 - 00:00:14 ART
Hi Joseph,
Great, thanks for your advice.
I previously used the "archive download-sw /overwrite /reload tftp://..."
method to dump in the .tar file and the upgrade failed.
I will try to tftp in the .bin file instead.
Thank you.
B.Rgds,
Lim TS
On 8/19/07, Joseph Brunner <joe@affirmedsystems.com> wrote:
>
> Just get the code, format the flash, and tftp it in.
>
> Its basic...
>
> Don't worry about the licenses...
>
> There is only CCIE certified and not CCIE certified.
>
> Nothing else matters
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Toh
> Soon, Lim
> Sent: Saturday, August 18, 2007 10:40 PM
> To: Antonio Soares
> Cc: Bob Nelson; ccielab@groupstudy.com
> Subject: Re: 3560 S to E upgrade
>
> Hi Antonio,
>
> Can you really upgrade the SMI to EMI without purchasing the upgrade kit?
>
> I remember I tried to upgrade a C3560G-48PS-S (with IP BASE) to IP
> SERVICES
> in order to support OSPF. The upgrade failed.
>
> This said, are we unable to upgrade all SMI models to EMI without the
> upgrade kit? I have a few C3560 SMI models which I want to upgrade to EMI
> for my lab practical.
>
> Please advise.
>
>
> Thank you.
>
> B.Rgds,
> Lim TS
>
>
>
>
>
> On 8/15/07, Antonio Soares <amsoares@netcabo.pt> wrote:
> >
> > AFAIK, there's no support contract that gives you Feature Set Upgrades.
> > Check here the SmartNet details:
> >
> >
> >
>
> http://www.cisco.com/application/pdf/en/us/guest/products/ps2978/c1592/cdcco
> > nt_0900aecd8042b4d6.pdf
> >
> > You can do the SMI-to-EMI upgrade but it will be unlicensed. You will
> need
> > to purchase the upgrade kit:
> >
> > CD-3560-EMI= Enhanced Multilayer Image upgrade for 3560 10/100 models
> >
> >
> > Regards,
> >
> > Antonio Soares
> > CCIE #18473, CCNP, CCIP
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > Bob
> > Nelson
> > Sent: terga-feira, 14 de Agosto de 2007 6:58
> > To: ccielab@groupstudy.com
> > Subject: 3560 S to E upgrade
> >
> > I researched this but it appears you have to purchase a license for the
> E
> > version. The device is under SmartNet, but I am not sure this is
> covered.
> > Is it just as simple as downloading the E version of software and
> > replacing
> > the S version, or is there some license key that is required to enable
> the
> > E
> > version prior or after installation? To purchase the upgrade key
> appears
> > to
> > cost almost as much as the switch, seem a little ridiculous since I have
> > SmartNet.
> >
> > If this is the case, what good does SmartNet do on the device?
> >
> > Any ideas or additional info would help.
> >
> > TIA
> >
> > B
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:12 ART