From: shiran guez (shiranp3@gmail.com)
Date: Sat Aug 18 2007 - 02:57:15 ART
Bandwidth and Priority are *Supported* for *output* policies only!
On 8/17/07, mam phuquoc <mamphuquoc@gmail.com> wrote:
>
> on a 6506 with SIP and SPA on slot 1, when I configure hiearchical QOS and
> apply it to the SPA port gig1/0/0, and cannot use the priority
> command. Is
> anyone able to do this?
>
> policy-map core-egress
> class VoIP_RTP
> bandwidth 100000
> class Video_Payload
> bandwidth 50000
> policy-map sonet-shape
> class class-default
> shape average 300000000
> service-policy core-egress
>
>
> Router(config)#policy-map egress
>
> Router(config-pmap)# class VoIP_RTP
> Router(config-pmap-c)#no bandwidth 100000
> Router(config-pmap-c)#priority percent 30
> *priority percent command is not supported in output direction for this
> interface
> Configuration failed on:
> GigabitEthernet1/0/0*
>
> IOS (tm) s3223_rp Software (s3223_rp-ADVIPSERVICESK9_WAN-M), Version 12.2
> (18)SXF
> 10, RELEASE SOFTWARE (fc1)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2007 by cisco Systems, Inc.
> Compiled Fri 13-Jul-07 03:58 by kellythw
> Image text-base: 0x40101040, data-base: 0x42D4DFC0
>
> ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)
> BOOTLDR: s3223_rp Software (s3223_rp-ADVIPSERVICESK9_WAN-M), Version 12.2
> (18)SXF
> 10, RELEASE SOFTWARE (fc1)
>
> cat65-xmc-a uptime is 3 hours, 16 minutes
> Time since cat65-xmc-a switched to active is 3 hours, 15 minutes
> System returned to ROM by s/w reset (SP by power-on)
> System image file is "sup-bootdisk:s3223-advipservicesk9_wan-
> mz.122-18.SXF10.bin
> "
>
>
> This product contains cryptographic features and is subject to United
> States and local country laws governing import, export, transfer and
> use. Delivery of Cisco cryptographic products does not imply
> third-party authority to import, export, distribute or use encryption.
> Importers, exporters, distributors and users are responsible for
> compliance with U.S. and local country laws. By using this product you
> agree to comply with applicable laws and regulations. If you are unable
> to comply with U.S. and local laws, return this product immediately.
>
> A summary of U.S. laws governing Cisco cryptographic products may be found
> at:
> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
>
> If you require further assistance please contact us by sending email to
> export@cisco.com.
>
> cisco WS-C6506-E (R7000) processor (revision 1.1) with 458752K/65536K
> bytes
> of m
> emory.
> Processor board ID SAL1121PR8U
> R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3
> Cache
> Last reset from power-on
> SuperLAT software (copyright 1990 by Meridian Technology Corp).
> X.25 software, Version 3.0.0.
> Bridging software.
> TN3270 Emulation software.
> 1 SIP-400 controller (2 GigabitEthernet).
> 1 Virtual Ethernet/IEEE 802.3 interface
> 11 Gigabit Ethernet/IEEE 802.3 interfaces
> 1915K bytes of non-volatile configuration memory.
>
> 65536K bytes of Flash internal SIMM (Sector size 512K).
> Configuration register is 0x2102
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Shiran Guez MCSE CCNP NCE1 http://cciep3.blogspot.com
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:11 ART